JohnKoaWood

I run 16lbs, tuned, wideband, bunch of other crap I have thrown together... wicked blowby on #3 and a turbo that like spitting oil after 15PSI.. not to mention the sprinkler seal that activates over 15PSI...

I will be lowering it to avoid oil spitting and knock, GD I need a different setup, cause this p**sy 26-6 just don't cut it anymore, I NEED MORE BOOST...

choinga

I'm dialed in at 15PSI on 93 gas in 3rd gear. If I floor it in 4th it will hit 16PSI.

I have a Vitesse MAF, Tial 38mm, 3BAR and 83#'rs and the SFR 3" with no cat.

ilikemy944

Maybe I was being a bit scary but on the k26/8 car I had with Vitesse MAF, 72lb injectors, full exhaust/tial/etc. I was running 22psi every day. _Lots_ of fun.

Now I run 15psi or whatever the Autothority banjo bolt did to my stock 86.

docwyte

I'm going to run 16psi with Vitesse stage 2 at altitude 91 octane and 18psi with race gas, overboost protection set at 20psi

porshhhh951

Vitesse is the **** isn't it.

JohnKoaWood

John,

How is your new car coming?

Did you ever end up picking up what you wanted?

Darwantae951

16lbs on 93 with MBC and SciVision MAF.

blown 944

25 daily on e85

30+ when I'm feeling froggy

all with hommade stuff .. with the exception of Rogue's tune

toddk911

You don't have to rub it in!!! lol

I would do anything for E85 local.

Hopefully in the near future Rogue will work some magic on a chip for me.

Adonay

I am running 13Psi at the moment Vitesse stage 3 will use more like 20+ on E85 next summer

Mike1982

With my mods now I run about 16-17 on the street but turn down to 14 at the track.

Cory9584

I run about 20 psi

buxton

16 psi with Russell's chips burned for 15 to 18 psi on 93 octane with a 26/8. Stock injectors, MBC, Tial 38 & 3 bar FPR. Be sure you get a good boost guage and don't rely on the stock guage.

944Willie

Thanks for the responce. What do you think of Russell's chips? I have the same (I think). Did you notice any difference from your prior and now comparison? It was reccomended to not install the chips until I had installed the 3 bar FPR and the bigger exhaust. Did you get the same directions?

porshhhh951

I've had a hard time to say the least. I believe I finally have what I want worked out now. Its been snowing for 2 days straight around here and will be snowing all week. To say I haven't been making it a priority is fair.

Depending on market it looks like used GS or used zo6.