Sport Edition Cup 4
#108
12.5 Inches from center to fender
No problem, if there is no rubbing at full + camber then there's no issue with less
PS
There's tons of room in there well slightly over enough
PS
There's tons of room in there well slightly over enough
#110
Rennlist Member
Here are a couple of photos for you.
1989 951 Glacier Blue - Sport Edition 4 with 225/40-18 & 265/35-18 tires.
The wheels are for sale if anyone is interested
1989 951 Glacier Blue - Sport Edition 4 with 225/40-18 & 265/35-18 tires.
The wheels are for sale if anyone is interested
#112
Rennlist Member
#114
Rennlist Member
#116
Three Wheelin'
#117
Rennlist Member
Thanks
FWIW, I think the Cup 4 wheels really suit the lines of the 944 and IMO the style of the wheel only looks right in 18" and 19". The 17" version is too compressed (short, fat spokes) and was clearly a design afterthought. If value is part of the picutre they are hard to beat but I wanted something a bit more special, hence the RH 3pc purchase.
FWIW, I think the Cup 4 wheels really suit the lines of the 944 and IMO the style of the wheel only looks right in 18" and 19". The 17" version is too compressed (short, fat spokes) and was clearly a design afterthought. If value is part of the picutre they are hard to beat but I wanted something a bit more special, hence the RH 3pc purchase.
#118
I had a great season with these wheels 9"s all around on 255/40's. For early offset looks, they could benefit from spacers, fronts and rears look a little sunk-in but I haven't bothered they're only for track but they look really good in person and suite the car very well. I've gotten quite a few compliments
The sunk-in I was talking about
The sunk-in I was talking about
Last edited by jasonlp; 11-25-2010 at 11:58 PM.
#119
Three Wheelin'
#120
Rennlist Member
OK rookie "wheel spacer" question: Do the spacers you used with these rims mount on top of the factory spacer (that bolts to the hub), or did you remove the factory spacer and remount with longer bolts directly through the hub and out through the wheel ?
I suppose a pic would help answer my question, so if anyone has one please post.
Thanks !
I suppose a pic would help answer my question, so if anyone has one please post.
Thanks !