Upgraded Axles from The Driveshaft Shop
12-29-2008, 05:29 AM
#196
Drifting
Join Date: May 2006
Location: Melbourne
Posts: 3,481
Likes: 0
Received 0 Likes
on
0 Posts
at that price tell them its likely to be 20 or so.
i did see in a prevoius thread that you can simply replace the cv ends with a hight spec one?
any one rember?? there was a guy who has nice hollow ones but he sujjested just change the ends
was it Markus ? or95ONE?
i did see in a prevoius thread that you can simply replace the cv ends with a hight spec one?
any one rember?? there was a guy who has nice hollow ones but he sujjested just change the ends
was it Markus ? or95ONE?
12-29-2008, 08:21 AM
#197
Rennlist Member
You've also increased from 400 to 500fl/tq so that's a bit of a jump. Nevertheless, I'm not doubting you although it would be nice to know some more of your direct experiences as they sound valuable. There's quite a few of us kicking around theories and likely to spend $ on these ideas so it would be nice to know if we're heading in the right direction from those that have gone before us.
12-29-2008, 11:28 AM
#198
Formula One Spin Doctor
Rennlist Member
Rennlist Member
My reply was based on my feeling that you were not so interested in drag racing as track racing. Perhaps I'm wrong although it's so hard to tell with your cloak of invisibility.
You've also increased from 400 to 500fl/tq so that's a bit of a jump. Nevertheless, I'm not doubting you although it would be nice to know some more of your direct experiences as they sound valuable. There's quite a few of us kicking around theories and likely to spend $ on these ideas so it would be nice to know if we're heading in the right direction from those that have gone before us.
You've also increased from 400 to 500fl/tq so that's a bit of a jump. Nevertheless, I'm not doubting you although it would be nice to know some more of your direct experiences as they sound valuable. There's quite a few of us kicking around theories and likely to spend $ on these ideas so it would be nice to know if we're heading in the right direction from those that have gone before us.
There are standing starts in road racing , yah !
As you wanted to know if anything over 400 ft/lb was good , so my response was changed to reflect that ! We have never ran a 951 over 500 ft/lb , so i can only say stock + cryoed and serviced regularly will last on a road course up to 500 ft/lb , No problem ....
Seeing you guys are now in monster territory, you might have to tell me if they will hold over 500 ft/lb running for at least an Hr, if you can handle it
...............We only had issues when using launch control , for standing starts ..
Yah! You will need a higher clearance level to know more
Yah ! Yah !
Last edited by A.Wayne; 12-29-2008 at 01:34 PM.
12-29-2008, 06:10 PM
#200
Rennlist Member
LOL....
There are standing starts in road racing , yah !
As you wanted to know if anything over 400 ft/lb was good , so my response was changed to reflect that ! We have never ran a 951 over 500 ft/lb , so i can only say stock + cryoed and serviced regularly will last on a road course up to 500 ft/lb , No problem ....
Seeing you guys are now in monster territory, you might have to tell me if they will hold over 500 ft/lb running for at least an Hr, if you can handle it...............
We only had issues when using launch control , for standing starts .. Yah!
You will need a higher clearance level to know more Yah ! Yah !
There are standing starts in road racing , yah !
As you wanted to know if anything over 400 ft/lb was good , so my response was changed to reflect that ! We have never ran a 951 over 500 ft/lb , so i can only say stock + cryoed and serviced regularly will last on a road course up to 500 ft/lb , No problem ....
Seeing you guys are now in monster territory, you might have to tell me if they will hold over 500 ft/lb running for at least an Hr, if you can handle it
...............We only had issues when using launch control , for standing starts ..
Yah! You will need a higher clearance level to know more
Yah ! Yah ! Hay! Hay! Hay!
12-30-2008, 01:31 AM
#201
Rennlist Member
Approx how much are rear axles and how much to cryo them?
