Project pictures...
#1
Former Vendor
Thread Starter
3.0l Project pictures...
...a.k.a. how things got out of the hands. I was just planning to change bearings and gaskets, and this is where I ended...
Last edited by pete95zhn; 10-06-2007 at 04:10 PM.
#5
heavy sigh...
..a.k.a. how things got out of the hands. I was just planning to change bearings and gaskets, and this is where I ended...
Tell me about it!!!!
Mine is still going on it's over a year now spending about 2k a month. It's prudent to say I am addicted it's cheaper to be REAL drug addict..
-BB
Tell me about it!!!!
Mine is still going on it's over a year now spending about 2k a month. It's prudent to say I am addicted it's cheaper to be REAL drug addict..
-BB
#6
Former Vendor
Thread Starter
Thanks!
Few details:
turbo 2,5l block
Darton MID sleeves
JE 104mm pistons
S2 crankshaft
turbo conrods
piston oil squirters machined into block
I-J crank scraper/windage tray
N/A head
ARP head studs
Cometic MLS gasket
new gaskets, bearings, belts, rollers, water pump
all hardware fresh plated or new
powdercoated this and that
I must thank Chris White for parts and support!
Pete
Few details:
turbo 2,5l block
Darton MID sleeves
JE 104mm pistons
S2 crankshaft
turbo conrods
piston oil squirters machined into block
I-J crank scraper/windage tray
N/A head
ARP head studs
Cometic MLS gasket
new gaskets, bearings, belts, rollers, water pump
all hardware fresh plated or new
powdercoated this and that
I must thank Chris White for parts and support!
Pete
#7
The finest 951 in Finland gets even better
Pete has done incredible job again, those pictures does not show the overal quality of this buildup. Not to speak about what there will be....
Pete has done incredible job again, those pictures does not show the overal quality of this buildup. Not to speak about what there will be....
Last edited by Olli Snellman; 08-20-2008 at 07:24 AM.
Trending Topics
#10
Nordschleife Master
Excellent Pete!!
I have to make a new visit soon and have a look
BTW. Sorry I totally forgot to send you the calculations we spoke about! I'll try to do that very soon
I have to make a new visit soon and have a look
BTW. Sorry I totally forgot to send you the calculations we spoke about! I'll try to do that very soon
#15
Rennlist Member
Nice idea on the piston squirters too. Not much room on a 2.5L block from what I believe.