Never brag about your true HP. Dedicated to the hard core 951 fans.
#46
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Originally Posted by toddk911
Of course if you have chips that adjust to whatever boost you run, you face a LOT less risk when you blindly turn up the boost.
#47
Drive-by provocation guy
Rennlist Member
Rennlist Member
Join Date: Apr 2002
Location: NAS PAX River, by way of Orlando
Posts: 10,439
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
I know 951MAXX are and I am pretty sure Vitesse do as well.
Turn up the boost and the a/f stays constant. To the limit of the fuel system.
I know myself and others with the 951MAXX chips can adjust the boost and the a/f stays about .2-.3 on target.
But even my GURU chips were set to run 18psi on pump. 20% for 19psi is way over kill
Which explains why you turning it up to 23psi had no ill efects due to running a 20% mix.
Turn up the boost and the a/f stays constant. To the limit of the fuel system.
I know myself and others with the 951MAXX chips can adjust the boost and the a/f stays about .2-.3 on target.
But even my GURU chips were set to run 18psi on pump. 20% for 19psi is way over kill
![Smilie](https://rennlist.com/forums/images/smilies/smile.gif)
Which explains why you turning it up to 23psi had no ill efects due to running a 20% mix.
#48
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Originally Posted by toddk911
I know 951MAXX are and I am pretty sure Vitesse do as well.
Turn up the boost and the a/f stays constant. To the limit of the fuel system.
I know myself and others with the 951MAXX chips can adjust the boost and the a/f stays about .2-.3 on target.
But even my GURU chips were set to run 18psi on pump. 20% for 19psi is way over kill
Which explains why you turning it up to 23psi had no ill efects due to running a 20% mix.
Turn up the boost and the a/f stays constant. To the limit of the fuel system.
I know myself and others with the 951MAXX chips can adjust the boost and the a/f stays about .2-.3 on target.
But even my GURU chips were set to run 18psi on pump. 20% for 19psi is way over kill
![Smilie](https://rennlist.com/forums/images/smilies/smile.gif)
Which explains why you turning it up to 23psi had no ill efects due to running a 20% mix.
#49
Instructor
Join Date: Oct 2004
Location: Oxfordshire, UK
Posts: 240
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
I dont know if you have a afm, but i have a vitesse MAF, and that will always keep the a/f ratio constant, which is great, as i have EBC to often switch from 10, 15 or 18 psi.
#50
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Great story lart!! I'm glad your motor held in place, that would have ruined your thanksgiving. But at least you would have gone down in flames. Lets here some 928 kill stories next lol!
#51
Addict
Lifetime Rennlist
Member
Lifetime Rennlist
Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Originally Posted by lart951
I am running authotority chips.
As for me, I've used John's chips for my old 3.0L. As other people have stated, with his chips, the A/F remains on the money regardless of the PSI level you run. And I can validate this statement because Special Tool and I ran tons, and tons of datalogs on my car. We used the ZT-2 to monitor it too. Great tool.
Vitesse Racing --->
![](http://www.rs6.com/forum/images/smilies/biggrin.gif)
#53
Monkeys Removed by Request
Lifetime Rennlist
Member
Lifetime Rennlist
Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
I agree on the new benchmark for chip tunning to be around 20psi rather than 15. No one runs 15 anymore.
Hell i've run 20 for 4 years now
Hell i've run 20 for 4 years now
#54
Drive-by provocation guy
Rennlist Member
Rennlist Member
Join Date: Apr 2002
Location: NAS PAX River, by way of Orlando
Posts: 10,439
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Originally Posted by porshhhh951
I agree on the new benchmark for chip tunning to be around 20psi rather than 15. No one runs 15 anymore.
Hell i've run 20 for 4 years now
Hell i've run 20 for 4 years now
MAN LAW:
20 PSI ON PUMP FROM NOW ON
![Smilie](https://rennlist.com/forums/images/smilies/smile.gif)
#56
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
I'm glad the car will be put to good use.
I'd rather see it recycled than just be shredded for scrap metal.
If Luis can make good $ on it, then that's great. Unfortunately for me I just was not able to do anything with the car myself due to my location. I'm sure Luis will make a few dollars as there are a couple things on the car to sell. That Greddy Type S with the adapters has always been a favorite of mine. It's been on a few high horsepower 1.8T cars in the past. The 951 also has Guru chips and all the associated hardware. I hope the interior has some bits that are nice and sellable. The cd player is hopefully still in the car too, not that it's worth much....
Anyway, I hope Luis comes out good on this deal. I certainly appreciate his help with the car.
btw Luis, you like those Scoobies over at Dan's shop? They're not slow..... The Evo isn't bad either.
I'd rather see it recycled than just be shredded for scrap metal.
If Luis can make good $ on it, then that's great. Unfortunately for me I just was not able to do anything with the car myself due to my location. I'm sure Luis will make a few dollars as there are a couple things on the car to sell. That Greddy Type S with the adapters has always been a favorite of mine. It's been on a few high horsepower 1.8T cars in the past. The 951 also has Guru chips and all the associated hardware. I hope the interior has some bits that are nice and sellable. The cd player is hopefully still in the car too, not that it's worth much....
Anyway, I hope Luis comes out good on this deal. I certainly appreciate his help with the car.
btw Luis, you like those Scoobies over at Dan's shop? They're not slow..... The Evo isn't bad either.
#57
Three Wheelin'
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Originally Posted by lart951
Dan, the car is pretty much scrap, I emailed Nick and he said $ 500.00 is okay. They guy at the shop said that he is taking the car to the junk yard today, interior is black and could be salvageable, the engine has 94k miles but the car caught fire and the front area melted to the ground, the engine is dirty but could be okay, if you want it I’ll let you take it instead of me , I don’t have any more room for another 951, I have 2 that I am parting right now, I just couldn’t let them take it to the junk yard. Let me know.
Lart
Lart
#58
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Originally Posted by ross255
I dont know if you have a afm, but i have a vitesse MAF, and that will always keep the a/f ratio constant, which is great, as i have EBC to often switch from 10, 15 or 18 psi.
I have a piggy back, I adjust my a/f accordinly to my boost level. So what you guys are trying to tell me is that if I had the vitesse chips, I could bump the boost from 19psi to 23psi without making any adjustment to the a/f ratio? Can someone confirm that this is possible?
#59
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Originally Posted by lart951
I have a piggy back, I adjust my a/f accordinly to my boost level. So what you guys are trying to tell me is that if I had the vitesse chips, I could bump the boost from 19psi to 23psi without making any adjustment to the a/f ratio? Can someone confirm that this is possible?
Yes, I can.
#60
Addict
Lifetime Rennlist
Member
Lifetime Rennlist
Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Originally Posted by lart951
So what you guys are trying to tell me is that if I had the vitesse chips, I could bump the boost from 19psi to 23psi without making any adjustment to the a/f ratio?
![](http://www.rs6.com/smilies/headkratz.gif)