Rennlist Top 10 HP/TQ
#1
Race Director
Thread Starter
NZ951's Top 10 HP/TQ
944 or 968 Turbo 2,801+cc
1. Duke (3.1 16v), 676 RWHP @ 1.5 bar E85
2. Corleone 560WHP at 1.25 bar E85
3. Zoran (3.0 16v) 537WHP (dyno dynamics)
4. 333pg333 (3.0 8v) 552 rwhp @ 25 psi E85
5. Refresh951 (3.1 8v) 535 RWHP @ 24 psi E85
6. George D. (3.0 8v) 531WHP / 495TQ (dynojet)
7. Duke (3.0 16v) 514 rwhp / 450 ft/lb @ 17 psi pump gas
8. Markus951 (3.0 16v) 495 RWHP / 395TQ
9. DFASTEST (3.0 16v) 480WHP / 470TQ (dynojet)
10. RolexNJ (3.0 8v) 461WHP / 406TQ (dynojet)
11. Tom M'Guinn (3.0 8v VR5) 450WHO/473TQ (dynojet)
12. CMF (3.0 8v) 421RWHP 381TQ @ 16psi
13. Pete95zhn (3.0 8v) 405.7HP 565.5Nm
944 Turbo 0 - 2,500cc
1. Special Tool 602WHP / 480TQ (mustang dyno)
2. LindseyR 479WHP / 453TQ (unknown dyno)
3. Under Pressure Performance 475WHP / 392TQ (dynojet)
4. Bob Patterson 458WHP / 461TQ (mustang dyno)
5. George Darling 427WHP / 350TQ (dynojet)
6. Stewardx 416WHP / 388TQ (dynojet)
7. Raceboy 415 WHP, 16v, 1.2 bar, pump
8. 95ONE 415WHP / NO TORQUE (Dynojet)
9. Blown 944 410RWHP/445TQ (Dynojet)
10. RKD in OKD 395WHP / 381TQ (dynojet)
11. MPD47 394whp/391tq (dynojet)
Post your dyno chart (in WHP/kW).
1. Duke (3.1 16v), 676 RWHP @ 1.5 bar E85
2. Corleone 560WHP at 1.25 bar E85
3. Zoran (3.0 16v) 537WHP (dyno dynamics)
4. 333pg333 (3.0 8v) 552 rwhp @ 25 psi E85
5. Refresh951 (3.1 8v) 535 RWHP @ 24 psi E85
6. George D. (3.0 8v) 531WHP / 495TQ (dynojet)
7. Duke (3.0 16v) 514 rwhp / 450 ft/lb @ 17 psi pump gas
8. Markus951 (3.0 16v) 495 RWHP / 395TQ
9. DFASTEST (3.0 16v) 480WHP / 470TQ (dynojet)
10. RolexNJ (3.0 8v) 461WHP / 406TQ (dynojet)
11. Tom M'Guinn (3.0 8v VR5) 450WHO/473TQ (dynojet)
12. CMF (3.0 8v) 421RWHP 381TQ @ 16psi
13. Pete95zhn (3.0 8v) 405.7HP 565.5Nm
944 Turbo 0 - 2,500cc
1. Special Tool 602WHP / 480TQ (mustang dyno)
2. LindseyR 479WHP / 453TQ (unknown dyno)
3. Under Pressure Performance 475WHP / 392TQ (dynojet)
4. Bob Patterson 458WHP / 461TQ (mustang dyno)
5. George Darling 427WHP / 350TQ (dynojet)
6. Stewardx 416WHP / 388TQ (dynojet)
7. Raceboy 415 WHP, 16v, 1.2 bar, pump
8. 95ONE 415WHP / NO TORQUE (Dynojet)
9. Blown 944 410RWHP/445TQ (Dynojet)
10. RKD in OKD 395WHP / 381TQ (dynojet)
11. MPD47 394whp/391tq (dynojet)
Post your dyno chart (in WHP/kW).
Last edited by NZ951; 01-22-2012 at 01:25 AM.
#4
NZ for your lists i think you should just do a top 15, and just list the displacement next to the person. There just arent enough cars to fill the lists. As for my numbers, we wont know till late august.
#5
Race Director
Thread Starter
Mike, thanks for the advice, I will do that for the overall... but I want to keep the others separate, as I think its important to make the distinction.
Trending Topics
#12
Addict
Rennlist Member
Rennlist
Site Sponsor
Rennlist Member
Rennlist
Site Sponsor
Peak numbers are fine, however the actual power curve is more important. The type of dyno used is a must, as load dyno (such as Mustang) reads lower than a DynoJet.
#13
We will know EXACTLY how much lower here in a few weeks because I have made zero changes and am going to the dynojet.
And I am not going to drop the throttle so early like a wuss this time, either.
And I am not going to drop the throttle so early like a wuss this time, either.
#14
Addict
Rennlist Member
Rennlist Member
My numbers (297 rwhp, 317 rwtq on 2.5L) probably won't survive as a top 10 overall, but it probably makes a top 10 for a stock K26, albeit a K26/8. Here's the dyno chart (from a Dynojet) I posted last year:
#15
Monkeys Removed by Request
Lifetime Rennlist
Member
Lifetime Rennlist
Member
dyno before started really playing around with the power perfect and maf tuner.
I guess I need to go back because with my air/fuel cleaned up a little im prolly making a little more power now.
Ahhh vitesse..... my dyno will look much better.
I was thinking since I was going to have to buy his chips anyway if I want his turbo ect....why not do a test between johns chips and the koklen's I run now. I know there would be a jump.
I think it would be kind of cool to compare and see just how much difference there would be. Plus with before and after dyno's it might help him sell some more chips....lol Not that he needs any help.
301hp 341tq
I guess I need to go back because with my air/fuel cleaned up a little im prolly making a little more power now.
Ahhh vitesse..... my dyno will look much better.
I was thinking since I was going to have to buy his chips anyway if I want his turbo ect....why not do a test between johns chips and the koklen's I run now. I know there would be a jump.
I think it would be kind of cool to compare and see just how much difference there would be. Plus with before and after dyno's it might help him sell some more chips....lol Not that he needs any help.
301hp 341tq