Rennlist Top 10 HP/TQ
07-29-2005, 02:11 PM
AddictRennlist Member
Join Date: Mar 2002
Location: Greater Boston
Posts: 1,930
John (porshhhh951) - Your dyno plots look amazingly similar to mine! Are you sure you don't have a K26/8 in your car??
07-29-2005, 04:44 PM
Race Director
Thread Starter
Join Date: Apr 2003
Location: New Zealand massive
Posts: 13,778
Quote:
Originally Posted by OriginalSterm
should it be specified what kind of dyno the numbers come from? are dyno sheets required for proof, or are we on the honor system?
Maybe the numbers should specify the dyno, but I dont want to create another category, so where possible I will put a note next the the numbers. I will ask for a dyno sheet where I feel it necessary...
07-29-2005, 04:48 PM
Race Director
Thread Starter
Join Date: Apr 2003
Location: New Zealand massive
Posts: 13,778
Quote:
Originally Posted by fast951
Peak numbers are fine, however the actual power curve is more important. The type of dyno used is a must, as load dyno (such as Mustang) reads lower than a DynoJet.
You are very correct about the curve, hence why I thought about adding HP and TQ then dividing by when peak TQ is realised to get a ratio. I will be adding the dyno used where possible.
07-29-2005, 04:52 PM
Banned
Join Date: Apr 2002
Location: limbo....
Posts: 8,599
Likes: 0
A lttle birdie told me about a guy with a higher 2.5 than mine - let's see if he posts - if he isn't UNDER too much PRESSURE.....
07-29-2005, 05:08 PM
Instructor
Join Date: Jun 2001
Location: Atlanta
Posts: 242
Likes: 0
Received 0 Likes
on
0 Posts
I better get in while I'm still on the list. My bests (from 2 different runs, dynojet) were 282 hp and 308 ft-lbs. Thanks.
Andy
07-29-2005, 05:13 PM
Rennlist Member
Join Date: Jul 2002
Posts: 77,321
Mines pretty modest at 240/276. This is with the stock WG.
07-29-2005, 05:22 PM
The Carnage KingRennlist Member
Join Date: Oct 2003
Posts: 7,476
Likes: 0
Quote:
Originally Posted by special tool
A lttle birdie told me about a guy with a higher 2.5 than mine - let's see if he posts - if he isn't UNDER too much PRESSURE.....
This one?
07-29-2005, 05:51 PM
Rennlist Member
Join Date: Mar 2005
Location: In the garage trying to keep boost down
Posts: 8,809
Likes: 0
Received 0 Likes
on
0 Posts
Here is mine hope it makes it to the list.
Attached Images
07-29-2005, 07:00 PM
Banned
Join Date: Apr 2002
Location: limbo....
Posts: 8,599
Likes: 0
MPD - yes. That thing probably makes a little bit of power.
07-29-2005, 07:13 PM
Three Wheelin'
Join Date: Sep 2001
Location: Calgary, Alberta, Canada
Posts: 1,596
Likes: 0
Received 0 Likes
on
0 Posts
2.5L - 461WHP(6500)/401WTQ(5700)
2.8L - 412WHP(6400)/372WTQ(5600)
dynojet numbers
07-29-2005, 07:19 PM
AddictRennlist Member Rennlist Site Sponsor
Join Date: Mar 2002
Location: Atlanta
Posts: 6,885
Likes: 0
OT - Any idea where to get the lhood louvers from?
07-29-2005, 07:22 PM
Race Director
Thread Starter
Join Date: Apr 2003
Location: New Zealand massive
Posts: 13,778
They look like the ones marketed by that 928 Performance place.
07-30-2005, 12:02 AM
Drifting
Join Date: Nov 2001
Location: Round Hill, Virginia
Posts: 2,012
OK I know it's not "mine" but I did build it!! My buddy Dennis's 88 951 is up there...
Notice the curve......
07-30-2005, 12:31 AM
Race Director
Thread Starter
Join Date: Apr 2003
Location: New Zealand massive
Posts: 13,778
Chris, does he have a Rennlist name?
07-30-2005, 02:09 AM
Monkeys Removed by RequestLifetime Rennlist Member
Join Date: Feb 2003
Location: New York
Posts: 7,713
Likes: 0
Quote:
Originally Posted by Jake951
John (porshhhh951) - Your dyno plots look amazingly similar to mine! Are you sure you don't have a K26/8 in your car??
been debated to death...no I dont.