The Official Mongo's 928 Exorcism Thread (Begins on Page 4)
#166
Andy:
I watched the video and it seemed fine. The initial rough running adjustments you mention on first start-up would be expected after it appeared to be running without a MAF signal last time. Where is the idle now? Didn't sound too high. Did you take it for a test drive? Your NB AFR meter is now working like it should (oscillating between lean and rich).
I watched the video and it seemed fine. The initial rough running adjustments you mention on first start-up would be expected after it appeared to be running without a MAF signal last time. Where is the idle now? Didn't sound too high. Did you take it for a test drive? Your NB AFR meter is now working like it should (oscillating between lean and rich).
#167
Chronic Tool Dropper
Lifetime Rennlist
Member
Lifetime Rennlist
Member
Joined: Oct 2001
Posts: 20,506
Likes: 549
From: Bend, Oregon
Andy--
Put the air cleaner housing back on. The bell in the bottom smooths airflow through the MAF, so it's a good idea to have it installed before you do any serious evaluation of lean/rich conditions.
Put the air cleaner housing back on. The bell in the bottom smooths airflow through the MAF, so it's a good idea to have it installed before you do any serious evaluation of lean/rich conditions.
#169
Thread Starter
Official Bay Area Patriot
Fuse 24 Assassin
Rennlist Member
Fuse 24 Assassin
Rennlist Member
Joined: Nov 2001
Posts: 31,653
Likes: 119
UPDATE
After 30 miles of driving, there is not one hiccup, sputter or any sign of posession so far. I will read psalm 23 tonight to play it safe and have pea soup for dinner.
After 30 miles of driving, there is not one hiccup, sputter or any sign of posession so far. I will read psalm 23 tonight to play it safe and have pea soup for dinner.