COLD AIR INTAKE NEXT LEVEL OF PERFORMANCE?
#17
Rennlist Member
#18
Been selling Twinkies on Ebay,
have some extra cash right now.
Rennlist Member
have some extra cash right now.
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Figuring Tim is an averege 928'er enthusiast size of 200 lbs
Figuring Tim has an average male body fluid of 60% (Tim is a guy, right? females average 50%)
So then Tim's beers = 200#x60%x3%= 3.6 lbs of beer
Figure beer weighs 8.35 lbs/gallon then 3.6/8.35=0.43 gallons of beer
0.43 gallonsx64oz/gal=27.5 ounces of beer
That seems entirely reasonable!
![Cheers](https://rennlist.com/forums/images/smilies/beerchug.gif)
OK back to paramedic studies now
#20
Burning Brakes
Thread Starter
Join Date: Jun 2008
Location: NY
Posts: 909
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Yep, we have a company built around the concept. The lastest eRAM does have near 4000watts, and is built on DC brushless motor technology (like the EDFs you show on the video). This system does require a separate set of small odessy-like batteries for a 24volt system. There is a new DC brushless system that is near 1000watts, near the same as the previous-current eRAM, that runs on DC brushless and is much more efficient.
It is very difficult to create substantial pressure with an axial flow fan, but it is absolulely possible. Much of the gains of the eRAM were due to reducing pressure drops in the intake air box, with some pressurization of the airbox itself or intake tube if it is sealed.
Mark
It is very difficult to create substantial pressure with an axial flow fan, but it is absolulely possible. Much of the gains of the eRAM were due to reducing pressure drops in the intake air box, with some pressurization of the airbox itself or intake tube if it is sealed.
Mark
#21
Rennlist Member
#22
Burning Brakes
Thread Starter
Join Date: Jun 2008
Location: NY
Posts: 909
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Thanks for looking into it,will see on the 120mm ones if they are with or without brushes.If you check it out see what boost might be 1.5 to 2lbs?
#24
Not the sharpest tool in the shed
Rennlist Member
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Sooooooo .... do you mount these things in the cold intake tubes? If yes and they are only used at WOT, seems to me they would block a lot of air flow for the majority of time you are not at WOT. Orrrr.... do you configure a seperate cold air intake system that has servos that block off the regular intake tubes? Someone needs to diagram for me how this system is implemented.
#25
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
the pressure is critically dependent on the impeller "rotor" style. the one in that video will never make much pressure, but the 6-8 bladed fan as we have shown on the picture, will. pressure is near 2psi. I dont know if this is the large or small version, but I thought one of them was to fit in the 4" intake tubes that the mustang guys were using.
mk
mk
#26
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
hmm, funny, you just asked the most common question over the 15 years we have been making these things. The quick answer is no. You do understand that you have a "Throttle" body, right? "Throttle" means "choke". when you are NOT at WOT, you have the throttle "choking" off the air flow, BY design. if it didnt, you would be running at max power all the time. Besides the point, the air flow of the eRAM on a flow bench is near the same flow as a 3" straight pipe, so its not a factor.
mk
mk
Sooooooo .... do you mount these things in the cold intake tubes? If yes and they are only used at WOT, seems to me they would block a lot of air flow for the majority of time you are not at WOT. Orrrr.... do you configure a seperate cold air intake system that has servos that block off the regular intake tubes? Someone needs to diagram for me how this system is implemented.
#27
Pro
Join Date: Jun 2008
Location: Québec, Québec, Canada
Posts: 695
Likes: 0
Received 2 Likes
on
2 Posts
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Surprised those electric fan keep coming back...
The only thing I remember from them is the guy who got parts in his cylinder, destroying his block in the process, cuz the engine normal aspiration at higher rpm was more than what the blade could take.
The only thing I remember from them is the guy who got parts in his cylinder, destroying his block in the process, cuz the engine normal aspiration at higher rpm was more than what the blade could take.
#28
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
What was it that P.T. Barnum said.........
![ducking](https://rennlist.com/forums/graemlins/icon107.gif)
#30
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
no, that was because the unit came apart due to manufacturing issues at the time. a V8 5 liter engine requires about 550cfm at 6000rpm, the fan puts out near 1000cfm. (confirmed and tested at Sema on a powerflo flow bench)
I used mine for 10 years, and still have the original unit. its more limited by engine output than anything else. at 250rwhp, it adds 5-8 hp. at 200hp it adds 10hp. at 300 t 350rwhp, there are little gains, but the shape of the curve can change slightly to be worth it. (thats on the very old version) The new version can help the higher hp cars, but it costs $$$$
I used mine for 10 years, and still have the original unit. its more limited by engine output than anything else. at 250rwhp, it adds 5-8 hp. at 200hp it adds 10hp. at 300 t 350rwhp, there are little gains, but the shape of the curve can change slightly to be worth it. (thats on the very old version) The new version can help the higher hp cars, but it costs $$$$