Coated 2V headers FS - 250.[SOLD]
#1
Rennlist Member
Thread Starter
Coated 2V headers FS - 250.[SOLD]
Coated 2V MSDS headers [SOLD]
Coated Headers:
250. They were 300 but I need to move them. S ee the picture - there has been some denting of the pipes to make them fit cars - but they were coated after this.
Coated Headers:
250. They were 300 but I need to move them. S ee the picture - there has been some denting of the pipes to make them fit cars - but they were coated after this.
Last edited by BC; 06-29-2010 at 09:43 PM.
#6
Rennlist Member
Thread Starter
I'll get the stamp numbers later, but the heads are apart and cleaned up a bit. They need guides as I pressed them out to measure the guide bore diamter in the heads. I think one exhaust stud needs a threadsert. Obviously no big deal.
YES - includes CAMS
YES - includes CAMS
Last edited by BC; 05-19-2010 at 11:29 AM.
#7
Rennlist Member
Thread Starter
The casting marks on one head are:
928.104.348.2R
K1947
E
1980
928.104.348.2R
K1947
E
1980
Trending Topics
#8
Rennlist Member
Thread Starter
Is this a reasonable price? Don't want it to sit because its priced wrong.
#10
Rennlist Member
Thread Starter
They would need to be rebuilt. I don't see where putting non-rebuilt heads together so that the buyer can just re-dis-assemble them to rebuild them? These are 500 dollar Euro heads that, like most others in this price, need to be rebuilt. If I spent 700 dollars rebuilding them, they would be 1200 dollar rebuilt Euro heads. Is that what you meant?
#12
Rennlist Member
Thread Starter
Thanks Mike. Does everyone understand why I am selling the runners, flanges, etc with the heads? Anyone wish to see pictures?
#13
Those of us building 5.0 hybrids understand but I'd rather hold out for the euro s stuff than do a bunch of fabrication. I might be ready for the heads in a couple weeks. I still need a 5.0L block too...
Last edited by chewy8000; 03-26-2010 at 10:06 PM.
#14
Rennlist Member
Thread Starter
Ah, the intake issue. Yeah, I have no idea what the differences would be. It was part of a plan for some boost, but that went to the other engine I have - a nearly-stock 89S4 motor.
I was trying to do the intake in a modular fashion to ease assembly and welding.
I was trying to do the intake in a modular fashion to ease assembly and welding.
#15
Rennlist Member
Thread Starter
I guess I forgot that I also have a set of 2V MSDS headers. They have been coated with an insulating paint in and out - black. It was done professionally, at a local coater.
They would be included with the deal I am posting here.
So Euro Heads, PC'd Cam boxes, 8 Runners, 2 Flanges for the runners, a set of coated headers. $999
Hey, that's some good stuff to build a nice top end! Maybe I should just use it.
They would be included with the deal I am posting here.
So Euro Heads, PC'd Cam boxes, 8 Runners, 2 Flanges for the runners, a set of coated headers. $999
Hey, that's some good stuff to build a nice top end! Maybe I should just use it.