FS 16V performance
08-13-2009, 08:12 AM
AutoX
Join Date: Dec 2003
Location: Yorkshire England
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
Certainly look very nice, the exhaust headers are for LHD i take it.
I'm certainly interested, just need time to put all the pieces together.
08-13-2009, 10:38 AM
Rennlist Member
Join Date: May 2009
Location: Woodstock Ga.
Posts: 1,482
Likes: 0
Received 0 Likes
on
0 Posts
If they are not sold in a month, 2 at the most, I will take them. Interested in a down payment?
Stephen
08-13-2009, 06:16 PM
Developer
Join Date: Dec 2001
Location: Horicon, WI
Posts: 7,005
Likes: 0
Were the cams a custom one-of billet production item, or are they Porsche cams? Do they have a manufacturers name or part number?
08-13-2009, 09:45 PM
Burning Brakes
Thread Starter
Join Date: Nov 2008
Location: West Vancouver B.C.
Posts: 908
Likes: 0
Stephen, whatever works ,
terryandterry@shaw.ca Carl the cam billets came from Germany unground and were ground by Logicam . there were only 10 sets avalable . I think the billets came from Porsche or their OEM supplyer . These cams were developed for a HP 4.7L by logicam . Because of the lift the heads and valve train are set up to match . Claimed they were good for 7500 rpm ,never tryed it . Terry
08-14-2009, 02:37 AM
Nordschleife Master
Join Date: Apr 2003
Location: Abbotsford B.C.
Posts: 9,600
Joel,
It would depend on the engine management system used.
As well you would need to modify the headers for wrong hand drive.
08-14-2009, 10:20 AM
Developer
Join Date: Dec 2001
Location: Horicon, WI
Posts: 7,005
Likes: 0
Awesome cam/head/valve combination. I think a little too much valve duration for a boosted engine (thats what I was looking at them for) but I think would totally kick *** in a built NA motor.
08-14-2009, 12:15 PM
Developer
Join Date: Dec 2001
Location: Horicon, WI
Posts: 7,005
Likes: 0
08-14-2009, 07:33 PM
Rennlist Member
Join Date: Mar 2002
Location: California
Posts: 1,617
Likes: 0
2 V raw unfinished cam blanks came from DEVEK.
08-17-2009, 03:24 PM
Burning Brakes
Thread Starter
Join Date: Nov 2008
Location: West Vancouver B.C.
Posts: 908
Likes: 0
Marc , Where did DEVEK source the cam blanks from . Terry
11-05-2009, 12:26 AM
Burning Brakes
Thread Starter
Join Date: Nov 2008
Location: West Vancouver B.C.
Posts: 908
Likes: 0
Still for sale 2500. ? Terry
11-05-2009, 07:58 AM
AddictRennlist Member
Join Date: Jun 2002
Posts: 3,318
Hi Terry what size are the valves and any pics on how the ports are done?
Greg
11-05-2009, 10:16 AM
Instructor
Join Date: Oct 2009
Location: Bucharest, Romania
Posts: 207
Likes: 0
Received 0 Likes
on
0 Posts
What other parts/work would these need in order to be used on top of a 5L block?
.......................................................
1979 Euro
11-05-2009, 10:23 AM
Nordschleife Master
Join Date: Apr 2003
Location: Abbotsford B.C.
Posts: 9,600
Quote:
Originally Posted by
Adrian_
What other parts/work would these need in order to be used on top of a 5L block?
.......................................................
1979 Euro
The right size of valve cutouts on top of the pistons. That is all.
11-05-2009, 10:43 AM
Instructor
Join Date: Oct 2009
Location: Bucharest, Romania
Posts: 207
Likes: 0
Received 0 Likes
on
0 Posts
You mean flycutting the pistons, right?
...............................................
1979 Euro
11-05-2009, 08:32 PM
Rennlist Member
Join Date: May 2009
Location: Woodstock Ga.
Posts: 1,482
Likes: 0
Received 0 Likes
on
0 Posts
Would these heads and cam work on a 4.5l 79'? If not would something have to be done to make it work.
Stephen