SCCA ITE RACE at Thunderhill This Weekend 10-25-08
#46
#47
just found out that rylan has bolted on some more hp in the supercharged S2000. 460rwhp, near 550flywhee!!! 2550lbs Too!!!!!
Looks like rylan has picked up the boost a bit!
Randy said he went by him like he was standing still in the 500hp camaro!!
http://opentrackracing.com/forum/sho...0&postcount=15
Looks like rylan has picked up the boost a bit!
Randy said he went by him like he was standing still in the 500hp camaro!!
http://opentrackracing.com/forum/sho...0&postcount=15
LOL
I'd be worrying about the NSX, not me. 500+ hp.
BTW I could make a reliable 450rwhp if I wanted to spend the money for a built bottom end. Which I don't.
-Ry
#48
I think the 450rwhp might not last a season. It didnt for PD Cunningham in his supercharged WCGT NSX, who's monster did have an engine change about mid season. I think it will take a season for that NSX to get into the low 1:30s at laguna, unless Kip is driving.
mk
mk
#50
Well, then that is a different story. I guess he will be beating up on the NASCAR powered mustang then.
Is he running the entire ITE season?
What about that 700hp 350z. (The tech helper for Michelle Nagi's Soutwest Touring car). That kid can drive and had sponsors lined up for the '09 season.
mk
Is he running the entire ITE season?
What about that 700hp 350z. (The tech helper for Michelle Nagi's Soutwest Touring car). That kid can drive and had sponsors lined up for the '09 season.
mk
#51
yup. Glad I won in 08 when it was doable. Kip plans to run the whole season.
We'll see who shows up tho. As you know by now there are always big stories in the winter and few seem to show up. I've heard about that 350Z for at least 2 years now. Kip on the other hand has the car, its built and running.
It's like 06 all over again
We'll see who shows up tho. As you know by now there are always big stories in the winter and few seem to show up. I've heard about that 350Z for at least 2 years now. Kip on the other hand has the car, its built and running.
It's like 06 all over again
#52
Wow, didnt think he was planning on doing the entire season. Wasnt that his street car?
Anyway, if kip has the resources of Kent ('06) then, I guess he can buy himself a championship too!
Ill probably have to have Anderson and his white 928 come up for one of the events at Laguna and give him a race.
mk
Anyway, if kip has the resources of Kent ('06) then, I guess he can buy himself a championship too!
Ill probably have to have Anderson and his white 928 come up for one of the events at Laguna and give him a race.
mk
yup. Glad I won in 08 when it was doable. Kip plans to run the whole season.
We'll see who shows up tho. As you know by now there are always big stories in the winter and few seem to show up. I've heard about that 350Z for at least 2 years now. Kip on the other hand has the car, its built and running.
It's like 06 all over again
We'll see who shows up tho. As you know by now there are always big stories in the winter and few seem to show up. I've heard about that 350Z for at least 2 years now. Kip on the other hand has the car, its built and running.
It's like 06 all over again
#54
#55
What a nut! SCCA PRO RACING safety specs, 650hp, $$$$$$, for ITE?
Why? There we go again, someone just buying a championship. Knock yourself out in Super Production, where it will run too, but ITE??? makes no sense to me. There might be a rule change coming in ITE based on our discussions, limiting transmissions to factory models. What does this thing run for a gear box?
did you guys check out the chassis after it was stripped?? 200+ lbs! At a final weight of 2400lbs, and all that power, it may only be limited by driver and tires. tires look pretty small for so much power.
mk
Why? There we go again, someone just buying a championship. Knock yourself out in Super Production, where it will run too, but ITE??? makes no sense to me. There might be a rule change coming in ITE based on our discussions, limiting transmissions to factory models. What does this thing run for a gear box?
did you guys check out the chassis after it was stripped?? 200+ lbs! At a final weight of 2400lbs, and all that power, it may only be limited by driver and tires. tires look pretty small for so much power.
mk
Last edited by mark kibort; 01-12-2009 at 09:08 PM.
#57