Spare Parts!!!
Thread Starter
Advanced
Joined: Apr 2002
Posts: 81
Likes: 0
From: Pickerington, ohio
Spare Parts!!!
Hey all,
Just wondered, if any one knows where i can get spare body panels for an 87 S4 for cheap. The panels i need are the front bumper,right fender, right door, right rear quarter panel. thanks in advance..
Just wondered, if any one knows where i can get spare body panels for an 87 S4 for cheap. The panels i need are the front bumper,right fender, right door, right rear quarter panel. thanks in advance..
Pro
Joined: Dec 2001
Posts: 586
Likes: 0
From: Ellsworth, Michigan
Smurf I hope that your going to keep the car. I was going to get back to you on our private e-mail conservation tonight. But the long and short of it is. My boat is in the garage and I have another lined up to do this winter so that eats up all of my time and the garage space. As for parts. I think that the best place to start is here on the board and then go onto e-bay. I'll keep my eyes open for anything that you need and e-mail the info to you.
Rennlist Member
Joined: Dec 2001
Posts: 25,186
Likes: 105
I have a passenger' side door for you Smurf, if that is the correct side. This is an 81 door, but they are all the same I think. NO rubstrip. I may also have a right rear quarter depending on what another gentleman needs in a previous discussion.
Trending Topics
Rennlist Stories
The Best Porsche Posts for Porsche Enthusiasts
10 Porsche Colors That Have More Personality Than Most People
Verdad Gallardo
Guntherwerks' Final Speedster Creation Is the Ultimate Porsche Restomod
Verdad Gallardo
10 Reasons I Hate Going to the Porsche Dealership (& the 1 Reason I Stay)
Joe Kucinski
Porsche Shakes Up The Nürburgring Lap Record Table Once Again
Verdad Gallardo
6 Ways the Porsche 911 GT3 S/C Redefines Performance
Joe Kucinski
10 Wildest Homologation Specials Porsche Ever Sold
Verdad Gallardo
Super Rare RUF BTR III Comes Out of Hibernation, Looking For a New Home
Verdad Gallardo
10 Porsche Opinions That Can Start a Fight
Joe Kucinski
One-Off Porsche 911 S/T Takes Inspiration From Famous '70s Race Car
Verdad Gallardo
Rennlist Member
Joined: Dec 2001
Posts: 25,186
Likes: 105
Depending on where you are, 375-400 including shipping for the full door with lock, wiring, and window assembly. I just shipped the driver's door to Iowa for 80 dollars.
Email me at brendancampion@***.net.
Sorry to everybody else for the on-board commerce.
Thanks,
Brendan
Email me at brendancampion@***.net.
Sorry to everybody else for the on-board commerce.
Thanks,
Brendan
Racer
Joined: Mar 2003
Posts: 438
Likes: 0
From: Columbus Ohio
Smurf,
I have to say after looking at the car last night it definitly has to be one of a kind. All of that body work is done in aluminum, not fiberglass I think that if you do decide to fix it yourself it is going to be a long project, I will give you a hand with anything you need. All of you guys out there you have to see this body kit to believe it someone really knew how to work alumoinum and steel, I expected this kit to be all fiberglass but it looks like the only fiberglass on the car is the rear wing. I have never seen anything like this in a body kit.
I have to say after looking at the car last night it definitly has to be one of a kind. All of that body work is done in aluminum, not fiberglass I think that if you do decide to fix it yourself it is going to be a long project, I will give you a hand with anything you need. All of you guys out there you have to see this body kit to believe it someone really knew how to work alumoinum and steel, I expected this kit to be all fiberglass but it looks like the only fiberglass on the car is the rear wing. I have never seen anything like this in a body kit.