When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
We have a few 928 engines in storage up here that came from fire damaged cars. A couple of them have either TBF, water pump failure (block damage) or TB failure.
Sure is a puzzling coincidence.
Originally Posted by Michael Benno
interesting the whole car was burned, was it involved in a house fire or something from the outside in?
Everything on a car is very flammable. If there isn't immediate response to a fire, once they get going it's difficult to stop until the fire runs out of things to burn.
The most spectacular car fire I was present for was a Ford Ranger doing a burnout when it blew a transmission line. Once that hot fluid hit the exhaust....poof...big fire. A fire marshal was there pretty quick with a big extinguisher that didn't slow down the fire one bit. I have the whole thing on film, it was at Sharks In Hell a number of years ago. Truck was a complete loss.
I'm a Porsche noob but even I can see that there is not one bit of that engine compartment that has not been compromised. Heat-damaged, soot-damaged, rusted, holy smokes (no pun) Maybe the radiator is salvageable?
Bonus question for you experts: are there small parts that are NLA that might be harvested and refurbished? Clips, brackets, things that don't wear or hold pressure?
Otherwise, sadly, it looks like future lunch boxes... or mail boxes... sad.
Cheers
I'm a Porsche noob but even I can see that there is not one bit of that engine compartment that has not been compromised. Heat-damaged, soot-damaged, rusted, holy smokes (no pun) Maybe the radiator is salvageable?
Bonus question for you experts: are there small parts that are NLA that might be harvested and refurbished? Clips, brackets, things that don't wear or hold pressure?
Otherwise, sadly, it looks like future lunch boxes... or mail boxes... sad.
Cheers
The short-block could be OK. One of the above mentioned fire engines purchased by a local friend, the intake manifold melted into the ports on the heads. After some careful clean-up work by Twin Turbo Todd, the engine was rebuilt and put to use.
I purchased this 89 back in 2005. The engine is awaiting rebuild and the transmission is living a new life in another 928. The block is damaged from a water pump impeller, but that's repairable. Brake calipers were fine, the MAF was rebuildable (and is currently in my 87). The LH / EZK survived along with a stack of paperwork in the glovebox that was water soaked. I dried out everything and have it in a file somewhere.
Well I bought the engine and picked it up today. Thanks to John Guzman for all his help - drove and helped with the unload. Upper timing belt covers off. Timing belt is in great condition - engine turns over by hand - great compression. No surprises in the oil.
End of day one. This was the easy part. Picking the melted plastic off the engine is next.
Thanks to Joe Cogbill for reaching out to me and selling the engine at a fair price,