Brumos 928
#241
Rennlist Member
Thread Starter
I know we talked about it at the time, but it just occurred to me that with computerized looms, it's possible to make small runs of custom fabric: https://www.weft.design/
(I wonder how much it would cost for a run of pascha!)
(I wonder how much it would cost for a run of pascha!)
The following users liked this post:
Shawn Stanford (06-05-2021)
#242
Rennlist Member
Thread Starter
#243
Rennlist Member
Thread Starter
#244
I'm with you Shawn.
The original black white script that was used in the early 80s is NLA, and the existing fabric was not quite usable due to wear and age. At some point Porsche shifted to the much more subtle black/black (and tan/tan, red/red etc) script...and the black/ black is currently available. This is a compromise I was forced to make....for now. Dale has carefully "engineered" the seats to be pulled apart and have the script sections replaced (without starting over on the entire seat) should I find the correct material.
Moving ahead with the seats now was an intentional calculation that will be apparent very soon...but the hunt is on for one more 40 year old unobtanium porsche product!
The original black white script that was used in the early 80s is NLA, and the existing fabric was not quite usable due to wear and age. At some point Porsche shifted to the much more subtle black/black (and tan/tan, red/red etc) script...and the black/ black is currently available. This is a compromise I was forced to make....for now. Dale has carefully "engineered" the seats to be pulled apart and have the script sections replaced (without starting over on the entire seat) should I find the correct material.
Moving ahead with the seats now was an intentional calculation that will be apparent very soon...but the hunt is on for one more 40 year old unobtanium porsche product!
#245
Rennlist Member
Thread Starter
working through some final details here...
The following 5 users liked this post by drooman:
Andrew Schauer (06-14-2021),
Bertrand Daoust (06-14-2021),
Donald Smith (06-20-2021),
linderpat (06-14-2021),
voskian (06-13-2021)
#247
Rennlist Member
Wow.
#248
Burning Brakes
incredible work drooman
#249
Rennlist Member
Thread Starter
Well normally I'd say thank you, but it's not my work! sonderwerks.com
The following 5 users liked this post by drooman:
Bertrand Daoust (06-14-2021),
Harvey928 (06-14-2021),
islaTurbine (06-14-2021),
merope (06-14-2021),
ngamountains (06-14-2021)
#250
Rennlist Member
Well after seeing so many threads recently of folks recovering their seats and accepting things like wrinkled side bolsters and ill fitting seat cushions, this goes to show that yes, there are people out there who really do know how to recover a 928 seat, and no, the excess wrinkled material isn't there so it can "shrink" to fit properly later. This is how it is supposed to be, from the get go and there is no excuse to not have it look this way. Great looking seats.
#251
Rennlist Member
Well after seeing so many threads recently of folks recovering their seats and accepting things like wrinkled side bolsters and ill fitting seat cushions, this goes to show that yes, there are people out there who really do know how to recover a 928 seat, and no, the excess wrinkled material isn't there so it can "shrink" to fit properly later. This is how it is supposed to be, from the get go and there is no excuse to not have it look this way. Great looking seats.
#252
Racer
Drooman, that looks fantastic!
#253
Drifting
Love. It.
#254
Rennlist Member