Garage sale
07-04-2014, 04:36 PM
#1
Race Car
Thread Starter
Join Date: Mar 2012
Location: Austin TX, drinking beer in the garage
Posts: 3,602
Likes: 0
Received 7 Likes
on
7 Posts
Garage sale
Clearing out my garage, help me make some room. Feel free to make me an offer on any item.
Stock intercooler, good condition and no dings-- 100
Stock hard pipes, small dings -- 40
working ISV-- 40
Early N/A alternator--- 35
Pair of stock N/A front springs -- 20
2 pairs of stock spring top hats--10 each
New set of late offset power inner tie rods, never installed and still in plastic --60
New set of late offset power inner tie rods, installed and used for about 1 week on the street before I decided I wanted to convert to early offset --45
Rebuilt N/A clutch fork with new bearing-- 100
Working 86 951 AFM-- 100
Used 2.5 bar FPR--15
factory 951 fuel pressure damper--25
working ignition coil--30
3" Adapter for cone filter for AFM-- 20
Used but working cycling valve--35
headlight motor--40
headlight bar with linkages--25
Complete pair of rear seat belts--100
Cam tower with early N/A cam-- 125
Bosch ignition control module off a 944S--20
4 late car cooling fan relays, 70 ea
Brand new front cam cover with new gasket, never installed--50
2 pairs of used parking brake shoes and springs---20 each
4 fuse tester relays---10 each
3 Distributor caps--15 each
2 distributor rotors--10 each
3 OEM spark plug wire sets-- 30 each
Crank/alternator pulley--25
Power steering pump-- 50
Also have all the power steering lines and tank, let me know what you need!
edit: updated 8/18
Stock intercooler, good condition and no dings-- 100
Stock hard pipes, small dings -- 40
working ISV-- 40
Early N/A alternator--- 35
Pair of stock N/A front springs -- 20
2 pairs of stock spring top hats--10 each
New set of late offset power inner tie rods, never installed and still in plastic --60
New set of late offset power inner tie rods, installed and used for about 1 week on the street before I decided I wanted to convert to early offset --45
Rebuilt N/A clutch fork with new bearing-- 100
Working 86 951 AFM-- 100
Used 2.5 bar FPR--15
factory 951 fuel pressure damper--25
working ignition coil--30
3" Adapter for cone filter for AFM-- 20
Used but working cycling valve--35
headlight motor--40
headlight bar with linkages--25
Complete pair of rear seat belts--100
Cam tower with early N/A cam-- 125
Bosch ignition control module off a 944S--20
4 late car cooling fan relays, 70 ea
Brand new front cam cover with new gasket, never installed--50
2 pairs of used parking brake shoes and springs---20 each
4 fuse tester relays---10 each
3 Distributor caps--15 each
2 distributor rotors--10 each
3 OEM spark plug wire sets-- 30 each
Crank/alternator pulley--25
Power steering pump-- 50
Also have all the power steering lines and tank, let me know what you need!
edit: updated 8/18
Last edited by Dougs951S; 08-18-2014 at 08:32 PM.
07-05-2014, 06:34 AM
#3
Race Car
Thread Starter
Join Date: Mar 2012
Location: Austin TX, drinking beer in the garage
Posts: 3,602
Likes: 0
Received 7 Likes
on
7 Posts
Low end torque be damned! I dont care if it has a 3000 rpm powerband, its going to be a NASTY powerband.
07-11-2014, 02:03 AM
#7
Race Car
Thread Starter
Join Date: Mar 2012
Location: Austin TX, drinking beer in the garage
Posts: 3,602
Likes: 0
Received 7 Likes
on
7 Posts
Used but in very good condition, the rotors are almost like new, just a bit tarnished from sitting, it would clean right up with some emory cloth.
Trending Topics
)
07-18-2014, 04:38 AM
#12
Rennlist Member
Would you be willing to ship:
2 pairs of stock spring top hats--10 each (Both sets) to Australia?
I know it's a bit of a big ask, but I've got a pair of bad ones and replacement stock ones are more than these + shipping would be.
2 pairs of stock spring top hats--10 each (Both sets) to Australia?
I know it's a bit of a big ask, but I've got a pair of bad ones and replacement stock ones are more than these + shipping would be.