Complete part out - '84 NA 944
#1
Rennlist Member
Thread Starter
Join Date: Feb 2009
Location: Mississippi
Posts: 1,294
Likes: 0
Received 0 Likes
on
0 Posts
Complete part out - '84 NA 944
Have already had a few parts requested off this car:
PORSCHE panel
DME
oil cooler shield
So these are considered pending sale, if you would like to put second in line for any of them let me know.
As it stands now the only things I will be keeping off this car is the hatch and I might try out the muffler for kicks.
Everything else will go. The wheels are 15" Fuch. One will need curb rash repair and all will need refinish if your think concorse. The interior is already pretty much gone from the car. The PO snapped a rear axle, started stripping the interior for a track car, got the axle eventually and then lost interest in the car. I have the replacement axle.
So if you have any request let me know. Be patient though, it would be few days before I could pull anything. It is a power steering car and power sunroof.
On a side note.....Sometime this fall I will remove some parts and powdercoat them for resale; if they are still unsold at that point. Things such as cam tower, itake and exhaust manifolds etc. I have the podwercoat set up to begin doing this but still need to finish the hot box. It will be 3' by 4' so should be able to powdercoat just about anything off a 944.
So take a look and let me know by pm any requests. I need a couple of undamaged front sunroof triangles and a center hatch release set up if anyone has a trade in mind.
michael
PORSCHE panel
DME
oil cooler shield
So these are considered pending sale, if you would like to put second in line for any of them let me know.
As it stands now the only things I will be keeping off this car is the hatch and I might try out the muffler for kicks.
Everything else will go. The wheels are 15" Fuch. One will need curb rash repair and all will need refinish if your think concorse. The interior is already pretty much gone from the car. The PO snapped a rear axle, started stripping the interior for a track car, got the axle eventually and then lost interest in the car. I have the replacement axle.
So if you have any request let me know. Be patient though, it would be few days before I could pull anything. It is a power steering car and power sunroof.
On a side note.....Sometime this fall I will remove some parts and powdercoat them for resale; if they are still unsold at that point. Things such as cam tower, itake and exhaust manifolds etc. I have the podwercoat set up to begin doing this but still need to finish the hot box. It will be 3' by 4' so should be able to powdercoat just about anything off a 944.
So take a look and let me know by pm any requests. I need a couple of undamaged front sunroof triangles and a center hatch release set up if anyone has a trade in mind.
michael
#2
Rennlist Member
Thread Starter
Join Date: Feb 2009
Location: Mississippi
Posts: 1,294
Likes: 0
Received 0 Likes
on
0 Posts
All PMs replied to up to this point.
Yes will be selling the hatch off my '86 driver after I transplant the hatch off this parts car. It is in good shape no separation. I would be willing to sell the wing only off of the euro hatch as I have a carbon fiber one I am replacing it with.
The wheels are missing two of the center caps. Tires are toast. I should have the part numbers off the wheels by this weekend sometime.
thanks,
michael
Yes will be selling the hatch off my '86 driver after I transplant the hatch off this parts car. It is in good shape no separation. I would be willing to sell the wing only off of the euro hatch as I have a carbon fiber one I am replacing it with.
The wheels are missing two of the center caps. Tires are toast. I should have the part numbers off the wheels by this weekend sometime.
thanks,
michael
#3
Three Wheelin'
Metal needed.
Here is the steel needed. It can be cut with a recip saw prior to scraping the frame.
I need approx 8" tall and 8" long.. (to have enough to work with)
I need approx 8" tall and 8" long.. (to have enough to work with)
#5
Rennlist Member
Thread Starter
Join Date: Feb 2009
Location: Mississippi
Posts: 1,294
Likes: 0
Received 0 Likes
on
0 Posts
#6
Rennlist Member
Thread Starter
Join Date: Feb 2009
Location: Mississippi
Posts: 1,294
Likes: 0
Received 0 Likes
on
0 Posts
I appreciate all the interests and am trying to reply to all requests as they come in for parts.
I am willing to sell the wing off the hatch. It's needs a little TLC so $50 plus shipping would take it.
Rear PORSCHE panel has sold.
The rear wheel is the one in need of curb rash repair. Should ahve PNs off of them tomorrow.
michael
Trending Topics
#9
Rennlist Member
how are the rear shocks? i need a good set (mine are completely blown) until i can pick up a new set of bilstein's for all four corners.
#12
Rennlist Member
Thread Starter
Join Date: Feb 2009
Location: Mississippi
Posts: 1,294
Likes: 0
Received 0 Likes
on
0 Posts
This one looks strong with little chance of seperation. I would be willing to sell to you for same pirice I gave you on the last one that fell through.
I will send pics of it tomorrow. Please resend me you your email.
michael
I will send pics of it tomorrow. Please resend me you your email.
michael
#13
Rennlist Member
Thread Starter
Join Date: Feb 2009
Location: Mississippi
Posts: 1,294
Likes: 0
Received 0 Likes
on
0 Posts