Question for 944 guys with Vented Nose Panels
#31
Three Wheelin'
Join Date: Sep 2001
Location: Calgary, Alberta, Canada
Posts: 1,596
Likes: 0
Received 0 Likes
on
0 Posts
If your car has a cone air filter and stock AFM, the vented nose panel helps greatly in taking in cold air, reducing heat soak in traffic.
Here's mine, hammered out by a local bodyshop.
Here's mine, hammered out by a local bodyshop.
#32
Race Car
Join Date: Jun 2003
Location: Albany, CA: celebrating 100 years of independence from Berkeley, CA
Posts: 4,887
Likes: 0
Received 2 Likes
on
2 Posts
Dan, clear your inboxes! (Already full?)
Okay, so here's the scoop (after all the dust has cleared).
I'm picking up a 931 vented nose panel for Porsche-O-Phile tomorrow from PartsHeaven in San Francisco. I was hoping to find a second one from them or another source, but that's not happening They only have the one -- if they had more, that would have been great.... It costs only $150 including the black vent thingies, if and when they have them.
So.... I'm sure you can borrow it from Porsche-O-Phile (well, I guess you should contact him once he receives it) to take measurements (or he can, or I can, or whatever)... He works in Glendale, so near you!
One potential wrinkle is that I'm going to be out of town starting next Wednesday -- so we might have coordination problems -- but one way or another, we'll get the measurements for you.
Okay, so here's the scoop (after all the dust has cleared).
I'm picking up a 931 vented nose panel for Porsche-O-Phile tomorrow from PartsHeaven in San Francisco. I was hoping to find a second one from them or another source, but that's not happening They only have the one -- if they had more, that would have been great.... It costs only $150 including the black vent thingies, if and when they have them.
So.... I'm sure you can borrow it from Porsche-O-Phile (well, I guess you should contact him once he receives it) to take measurements (or he can, or I can, or whatever)... He works in Glendale, so near you!
One potential wrinkle is that I'm going to be out of town starting next Wednesday -- so we might have coordination problems -- but one way or another, we'll get the measurements for you.
#33
Three Wheelin'
Join Date: Jun 2001
Location: Pasadena, CA
Posts: 1,476
Likes: 0
Received 0 Likes
on
0 Posts
Joseph - Thanks. Just cleaned out my mailbox - sorry. As I said before, out of town this weekend but I could easily meet up with him next week sometime. I'll drop him a PM (if I can figure out how) and make arrangements. Thanks for your help.
#34
Race Director
Originally Posted by josephsc
Dan, clear your inboxes! (Already full?)
Okay, so here's the scoop (after all the dust has cleared).
I'm picking up a 931 vented nose panel for Porsche-O-Phile tomorrow from PartsHeaven in San Francisco. I was hoping to find a second one from them or another source, but that's not happening They only have the one -- if they had more, that would have been great.... It costs only $150 including the black vent thingies, if and when they have them.
So.... I'm sure you can borrow it from Porsche-O-Phile (well, I guess you should contact him once he receives it) to take measurements (or he can, or I can, or whatever)... He works in Glendale, so near you!
One potential wrinkle is that I'm going to be out of town starting next Wednesday -- so we might have coordination problems -- but one way or another, we'll get the measurements for you.
Okay, so here's the scoop (after all the dust has cleared).
I'm picking up a 931 vented nose panel for Porsche-O-Phile tomorrow from PartsHeaven in San Francisco. I was hoping to find a second one from them or another source, but that's not happening They only have the one -- if they had more, that would have been great.... It costs only $150 including the black vent thingies, if and when they have them.
So.... I'm sure you can borrow it from Porsche-O-Phile (well, I guess you should contact him once he receives it) to take measurements (or he can, or I can, or whatever)... He works in Glendale, so near you!
One potential wrinkle is that I'm going to be out of town starting next Wednesday -- so we might have coordination problems -- but one way or another, we'll get the measurements for you.
If you guys do a search on the 951 forum, there are two posts regarding vent measurements to replicate the panel for a 951. I supplied all of the measurements necessary to NZ951 for this, along with photos/diagrams (from my 931 panel). I currently do not have that info on this compute, it's on one of my other machines.