Two questions....
#1
Rennlist Member
Thread Starter
Two questions....
Number one,
How do I become a full fledged member so that I wont be considered an outsider to the Frat?
Number two,
Since taking possession of my 85 exhaust and removal of my 84 exhaust (from my 84), could anyone use my intact and complete 84 system from y-pipe to muffler?
I would swap it for something if it better agreed with an interested individual.
It's been a while since I was last on and will mention the aluminum rack bushings and seat installation is all that's left to do (oh and set the timing. You do that at 3k, right?).
Regards!
How do I become a full fledged member so that I wont be considered an outsider to the Frat?
Number two,
Since taking possession of my 85 exhaust and removal of my 84 exhaust (from my 84), could anyone use my intact and complete 84 system from y-pipe to muffler?
I would swap it for something if it better agreed with an interested individual.
It's been a while since I was last on and will mention the aluminum rack bushings and seat installation is all that's left to do (oh and set the timing. You do that at 3k, right?).
Regards!
#3
No, no, no, no....
This isn't correct, not at all. Sheesh ! ! ! !
Everybody has to take THE TEST to be in The Frat.
Doesn't anybody read the New User FAQ anymore ?!?!?!?!?!
OK , here are the questions. Post your answers as needed. Good luck.
When the timer goes off, pencils down.
1) WHICH ONE IS NECESSARY TO REPAIR A 928 ?
2) IDENTIFY THE FUNCTION OF THESE 3 ITEMS ?
3) Which one of these items is currently in your pocket?
4) PICK ONE:
5) WHICH FOLDER IS IMPORTANT?
6) IDENTIFY THIS NUMBER:
817 430 2688
7) What is the airspeed velocity of an Unladen Swallow?
Thank you.
Dan
This isn't correct, not at all. Sheesh ! ! ! !
Everybody has to take THE TEST to be in The Frat.
Doesn't anybody read the New User FAQ anymore ?!?!?!?!?!
OK , here are the questions. Post your answers as needed. Good luck.
When the timer goes off, pencils down.
1) WHICH ONE IS NECESSARY TO REPAIR A 928 ?
2) IDENTIFY THE FUNCTION OF THESE 3 ITEMS ?
3) Which one of these items is currently in your pocket?
4) PICK ONE:
5) WHICH FOLDER IS IMPORTANT?
6) IDENTIFY THIS NUMBER:
817 430 2688
7) What is the airspeed velocity of an Unladen Swallow?
Thank you.
Dan
#7
Rennlist Member
^^^^K&N air filter - a MAF Killer!
Trending Topics
#8
Chronic Tool Dropper
Lifetime Rennlist
Member
Lifetime Rennlist
Member
No, no, no, no....
This isn't correct, not at all. Sheesh ! ! ! !
Everybody has to take THE TEST to be in The Frat.
Doesn't anybody read the New User FAQ anymore ?!?!?!?!?!
OK , here are the questions. Post your answers as needed. Good luck.
When the timer goes off, pencils down.
....
7) What is the airspeed velocity of an Unladen Swallow?
Thank you.
Dan
This isn't correct, not at all. Sheesh ! ! ! !
Everybody has to take THE TEST to be in The Frat.
Doesn't anybody read the New User FAQ anymore ?!?!?!?!?!
OK , here are the questions. Post your answers as needed. Good luck.
When the timer goes off, pencils down.
....
7) What is the airspeed velocity of an Unladen Swallow?
Thank you.
Dan
#9
Three Wheelin'
Clearly the biomass of the African swallow would make the question moot.
Now if you coated the swallow in, let's say, Mobil 1 20-50...then you can have a reasonable discussion...
Now if you coated the swallow in, let's say, Mobil 1 20-50...then you can have a reasonable discussion...
#11
........Is that an African or European swallow?.......
Huh? I....... I don't know.
ARRRRGGGGGGGGGGGGGGGGgggggggg g g g g
Huh? I....... I don't know.
ARRRRGGGGGGGGGGGGGGGGgggggggg g g g g
#12
Nobody coats swallows in Mobil 1 anyway.
Amsoil, brother, Amsoil......
Amsoil, brother, Amsoil......
#15