Who's doing what to their cars in 2008?
#61
Three Wheelin'
Maybe tha is the incident I remember Omar .. like anything else it as all about the right part for the right application .
wait for it ........... I just gotta show my favorite link again....
http://www.youtube.com/watch?v=-CuZyAnEAvM
actually for me the funniest part is when the camera views the inside of the car and he has his handbrake up ! , i guess he thinks it may rol away with no wheels on it ..
wait for it ........... I just gotta show my favorite link again....
http://www.youtube.com/watch?v=-CuZyAnEAvM
actually for me the funniest part is when the camera views the inside of the car and he has his handbrake up ! , i guess he thinks it may rol away with no wheels on it ..
#63
Nordschleife Master
Well my car is in the Body shop for the front/rear bumper respray, also getting these puppies installed
997 GT3 cup brake duck spoilers
Next on the list will be the clear bra for the front bumper.
997 GT3 cup brake duck spoilers
Next on the list will be the clear bra for the front bumper.
Last edited by jumper5836; 02-21-2008 at 01:42 PM.
#65
Nordschleife Master
#66
Pocket Sand
Rennlist Member
Rennlist Member
Thread Starter
Join Date: Jul 2004
Location: Ask Rusty Shackleford.
Posts: 7,649
Likes: 0
Received 0 Likes
on
0 Posts
the 997 turbo has the biggest ducts out of all of em.
how much bigger than ours are the 997 cup ones? id imagine they're similar to the gt3rs and 996 cup
how much bigger than ours are the 997 cup ones? id imagine they're similar to the gt3rs and 996 cup
#67
Nordschleife Master
https://rennlist.com/forums/showthre...94#post4205794
Paul says the 997 cup ducts look like the one in the middle. Our standard ducts like the one on top.
Paul says the 997 cup ducts look like the one in the middle. Our standard ducts like the one on top.
Last edited by jumper5836; 02-21-2008 at 01:50 PM. Reason: forget that
#69
Pocket Sand
Rennlist Member
Rennlist Member
Thread Starter
Join Date: Jul 2004
Location: Ask Rusty Shackleford.
Posts: 7,649
Likes: 0
Received 0 Likes
on
0 Posts
way ahead of you on that one.
Phase 1 - Find out of BradG. has a daughter within the ages of 17-28.
Phase 2 - Get on badge wielding father-in-law's good side.
Phase 3 - Challenge Peel Regional Chopper to race up and down Hamilton mountain (anyone remember that movie Iron Eagle from the 80's?...like that...but with shorter sideburns)
aside: i just found out that getting my new front spoiler from porsche is 300$. Add that to the rear ECU cover carpet for 300$ and you'll understand why the rx-7 club guys looked at me like i was a complete mental case when i told them i was selling my spare parts car and NA transmission because i wanted a front spoiler and carpet.
What's worst is that they put those speed waves infront of most of my friend's houses so i'm guarenteed to sheer the damn thing off within a month of ownership! :'(
Phase 1 - Find out of BradG. has a daughter within the ages of 17-28.
Phase 2 - Get on badge wielding father-in-law's good side.
Phase 3 - Challenge Peel Regional Chopper to race up and down Hamilton mountain (anyone remember that movie Iron Eagle from the 80's?...like that...but with shorter sideburns)
aside: i just found out that getting my new front spoiler from porsche is 300$. Add that to the rear ECU cover carpet for 300$ and you'll understand why the rx-7 club guys looked at me like i was a complete mental case when i told them i was selling my spare parts car and NA transmission because i wanted a front spoiler and carpet.
What's worst is that they put those speed waves infront of most of my friend's houses so i'm guarenteed to sheer the damn thing off within a month of ownership! :'(
#70
Drifting
Join Date: Sep 2006
Location: Toronto, C eh! N eh! D eh!
Posts: 2,281
Likes: 0
Received 0 Likes
on
0 Posts
My list of to do for the spring:
Install Front Hood Pins.
Gut interior hood release mechanism.
Install Dzus fasteners for quick release of front bumper.
Gut trunk release mechanism.
Install rear latch mounts.
Install new radio car/helmet IMSA harness, test radio.
Gut door panels.
Install removable lexan windows, driver and passenger.
3 new sets of tires.
Align.
Test.
Adjust.
Align.
Race.
Fix.
Bring the '87 951 in for a Paint Job and sell.
cheers,
P
Install Front Hood Pins.
Gut interior hood release mechanism.
Install Dzus fasteners for quick release of front bumper.
Gut trunk release mechanism.
Install rear latch mounts.
Install new radio car/helmet IMSA harness, test radio.
Gut door panels.
Install removable lexan windows, driver and passenger.
3 new sets of tires.
Align.
Test.
Adjust.
Align.
Race.
Fix.
Bring the '87 951 in for a Paint Job and sell.
cheers,
P
#71
Pocket Sand
Rennlist Member
Rennlist Member
Thread Starter
Join Date: Jul 2004
Location: Ask Rusty Shackleford.
Posts: 7,649
Likes: 0
Received 0 Likes
on
0 Posts
patrick,
how do the dzus fasteners work? i wouldn't mind a quick solution to getting front bumpers off and on. it'll make getting the car up on the alignment machine so much easier.
how do the dzus fasteners work? i wouldn't mind a quick solution to getting front bumpers off and on. it'll make getting the car up on the alignment machine so much easier.
#72
Pocket Sand
Rennlist Member
Rennlist Member
Thread Starter
Join Date: Jul 2004
Location: Ask Rusty Shackleford.
Posts: 7,649
Likes: 0
Received 0 Likes
on
0 Posts
ordered the 997 brake ducts today from the dealer along with the gt3 front swaybar that i was missing.
new wheels are en route along with bumper, rear wing and missing interior pieces.
i do have a gt3 lower console delete kit in black if someone wants it.
new wheels are en route along with bumper, rear wing and missing interior pieces.
i do have a gt3 lower console delete kit in black if someone wants it.
#73
Drifting
Join Date: Sep 2006
Location: Toronto, C eh! N eh! D eh!
Posts: 2,281
Likes: 0
Received 0 Likes
on
0 Posts
Most likely they will need to be exposed on the bumper, so may not be the best choice for a street car. But great for a race car!
A description:
http://en.wikipedia.org/wiki/Dzus_Fastener
Where to buy:
http://www.pegasusautoracing.com/pro...asp?RecId=4384
How it works...
Using small bolts or rivets (preffered), you fasten the stud assembly to your bumper or whatever part you want to remove quickly.
Stud Assembly: http://www.pegasusautoracing.com/big....asp?RecId=758
You also need to bolt or rivet a receptacle on the recieving side of what you want to mount the part to:
Receptacle: http://www.pegasusautoracing.com/big....asp?RecId=765
Here is a picture of the receptacle mounted to weld plate so you get an idea of what it looks like:
http://www.pegasusautoracing.com/big....asp?RecId=765
Once DZUS fasteners are installed, you can remove and install the part VERY quickly. I suspect my front bumper/valance/splitter combo will need 8-10 of these, but once on, you use this tool to simply turn each fastener a 1/4 to release.
Tool -> http://www.pegasusautoracing.com/big....asp?RecId=816
It's actually kinda fun and cool to show people how quickly you can take off body parts when they are used properly...
Hope this helps!
-Patrick
A description:
http://en.wikipedia.org/wiki/Dzus_Fastener
Where to buy:
http://www.pegasusautoracing.com/pro...asp?RecId=4384
How it works...
Using small bolts or rivets (preffered), you fasten the stud assembly to your bumper or whatever part you want to remove quickly.
Stud Assembly: http://www.pegasusautoracing.com/big....asp?RecId=758
You also need to bolt or rivet a receptacle on the recieving side of what you want to mount the part to:
Receptacle: http://www.pegasusautoracing.com/big....asp?RecId=765
Here is a picture of the receptacle mounted to weld plate so you get an idea of what it looks like:
http://www.pegasusautoracing.com/big....asp?RecId=765
Once DZUS fasteners are installed, you can remove and install the part VERY quickly. I suspect my front bumper/valance/splitter combo will need 8-10 of these, but once on, you use this tool to simply turn each fastener a 1/4 to release.
Tool -> http://www.pegasusautoracing.com/big....asp?RecId=816
It's actually kinda fun and cool to show people how quickly you can take off body parts when they are used properly...
Hope this helps!
-Patrick
#75
Pocket Sand
Rennlist Member
Rennlist Member
Thread Starter
Join Date: Jul 2004
Location: Ask Rusty Shackleford.
Posts: 7,649
Likes: 0
Received 0 Likes
on
0 Posts
https://rennlist.com/forums/showthre...94#post4205794
Paul says the 997 cup ducts look like the one in the middle. Our standard ducts like the one on top.
Paul says the 997 cup ducts look like the one in the middle. Our standard ducts like the one on top.