14 Clash at the Glen Video tread :-)
06-04-2014 | 04:14 PM
#61
Rennlist Member
Joined: Aug 2001
Posts: 4,473
Likes: 5
From: New York, NY
I like Fred's vid. Working really hard in that car, lots of body english, very physical. Consider a containment seat.
Muller, you're in there with a SpecB? Pretty impressive.
I'm hoping to come back in an F Box.
Muller, you're in there with a SpecB? Pretty impressive.
I'm hoping to come back in an F Box.
06-04-2014 | 10:51 PM
#64
Rennlist Member
Joined: Nov 2007
Posts: 1,526
Likes: 115
From: East Coast
06-04-2014 | 11:29 PM
#66
Rennlist Member
Joined: Nov 2007
Posts: 1,526
Likes: 115
From: East Coast
06-04-2014 | 11:50 PM
#67
Drifting
Joined: Feb 2006
Posts: 3,052
Likes: 68
From: Connecticut
06-05-2014 | 12:39 AM
#68
Rennlist Member
Joined: Oct 2002
Posts: 12,008
Likes: 95
From: Hyde Park, NY
Van,
Any racing video from you car at the WGI Clash? You did post a start of Sprint Race 2 from the pit area.
How did your car perform, any problems?
I broke an inlet valve spring on cylinder #1 at a CHIN WGI event the previous week. I ran two session, than the #1 cylinder did not fire. All electrical checks were negative and switched injectors, but no fire......exhaust header temperature was below 100F and the "no sizzle with the spit test on #1 header vs the other 3. Fortunately, the compression test for #1 was 170 psi, so no hole in piston and no bend valve stem.
In the shop to replace all valve spring sets.
Tom
Any racing video from you car at the WGI Clash? You did post a start of Sprint Race 2 from the pit area.
How did your car perform, any problems?
I broke an inlet valve spring on cylinder #1 at a CHIN WGI event the previous week. I ran two session, than the #1 cylinder did not fire. All electrical checks were negative and switched injectors, but no fire......exhaust header temperature was below 100F and the "no sizzle with the spit test on #1 header vs the other 3. Fortunately, the compression test for #1 was 170 psi, so no hole in piston and no bend valve stem.
In the shop to replace all valve spring sets.
Tom
I had contact in the first sprint and had to sit the rest of the weekend out.
If you have 170 psi of compression in cylinder 1, them I'm surprised that it's not firing... I think something's not adding up.
06-05-2014 | 01:13 AM
#70
Drifting
Joined: Feb 2006
Posts: 3,052
Likes: 68
From: Connecticut
06-06-2014 | 06:41 AM
#73
Thread Starter
Burning Brakes
Joined: Jan 2011
Posts: 876
Likes: 24
From: Redding CT
Matt:
U should get Bela F Boxster and go beat Yonker!, but than you whould have to get all different class cars to beat the rest.
Or better to get SP3 944 and beat me and Rob, Dan.... :-)
U should get Bela F Boxster and go beat Yonker!, but than you whould have to get all different class cars to beat the rest.
Or better to get SP3 944 and beat me and Rob, Dan.... :-)
06-06-2014 | 10:14 AM
#74
Pro
Joined: May 2009
Posts: 649
Likes: 5
06-06-2014 | 11:35 AM
#75
Rennlist Member
Joined: Nov 2007
Posts: 1,526
Likes: 115
From: East Coast
Don't see me buying anything older than 15 years to race. I like the looks of an F Boxster. Same car, more horsepower. Buy a SPB and come race slow cars!!