NASA's New GTS Rules For 2011....
#1
Nordschleife Master
Thread Starter
Join Date: Oct 2004
Location: Vacuuming Cal Speedway
Posts: 7,306
Likes: 0
Received 7 Likes
on
5 Posts
NASA's New GTS Rules For 2011....
In summary....
They raised the GTS5 class weight/HP ratio from 6.5 to 7.2, and left the other classes alone. It appears they're trying to force the later model 2010 cups into GTSU while allowing 6 & 7 cups to run in GTS5. At 2775 lbs, it'll take no more than 375 rwhp to stay in GTS5 including the .2 factory race car penalty described below.
They also added a .2 penalty on factory race cars like GT3 Cups, and/or cars with sequential trannies. It's only one .2 penalty not combined if in a 7-cup.
They will accept only Dynojet dyno certificates.
http://www.nasaproracing.com/rules/gts_rules.pdf
They raised the GTS5 class weight/HP ratio from 6.5 to 7.2, and left the other classes alone. It appears they're trying to force the later model 2010 cups into GTSU while allowing 6 & 7 cups to run in GTS5. At 2775 lbs, it'll take no more than 375 rwhp to stay in GTS5 including the .2 factory race car penalty described below.
They also added a .2 penalty on factory race cars like GT3 Cups, and/or cars with sequential trannies. It's only one .2 penalty not combined if in a 7-cup.
They will accept only Dynojet dyno certificates.
http://www.nasaproracing.com/rules/gts_rules.pdf
#2
In summary....
They raised the GTS5 class weight/HP ratio from 6.5 to 7.2, and left the other classes alone. It appears they're trying to force the later model 2010 cups into GTSU while allowing 6 & 7 cups to run in GTS5. At 2775 lbs, it'll take no more than 375 rwhp to stay in GTS5 including the .2 factory race car penalty described below.
They also added a .2 penalty on factory race cars like GT3 Cups, and/or cars with sequential trannies. It's only one .2 penalty not combined if in a 7-cup.
They will accept only Dynojet dyno certificates.
http://www.nasaproracing.com/rules/gts_rules.pdf
They raised the GTS5 class weight/HP ratio from 6.5 to 7.2, and left the other classes alone. It appears they're trying to force the later model 2010 cups into GTSU while allowing 6 & 7 cups to run in GTS5. At 2775 lbs, it'll take no more than 375 rwhp to stay in GTS5 including the .2 factory race car penalty described below.
They also added a .2 penalty on factory race cars like GT3 Cups, and/or cars with sequential trannies. It's only one .2 penalty not combined if in a 7-cup.
They will accept only Dynojet dyno certificates.
http://www.nasaproracing.com/rules/gts_rules.pdf
#5
The black car fits nicely in GTS5 though at right around 2500 lbs with 350 rwhp on slicks.
#6
Nordschleife Master
Thread Starter
Join Date: Oct 2004
Location: Vacuuming Cal Speedway
Posts: 7,306
Likes: 0
Received 7 Likes
on
5 Posts
I am going to need ballast....for ST1 too I think. New car is going to be light, probably close to 2500 with driver. Or i'm going to have to figure out hwo to make the car work on DOTs
The black car fits nicely in GTS5 though at right around 2500 lbs with 350 rwhp on slicks.
The black car fits nicely in GTS5 though at right around 2500 lbs with 350 rwhp on slicks.
#7
Wanna buy it? 0 hrs on motor and about 15 on a gt3 cup trans...3 way JRZs, 1 year old fuel cell. 3 sets of fikses. Make you a good deal. My best rolling lap at Fontana was a 1:42, should be able to get better than that with some fresh tires and more setup.
;-)
http://vimeo.com/6124613
Trending Topics
#8
Burning Brakes
JGordon, I met you out at Nasa Nationals this year, I was driving the Black/Orange Cup car in GTS and the White 997 Carrera in PTA.
Anyway I have a 996 Cup motor we are doing a leak down test on Monday that I may want to sell.
Send me a PM if you are interested.
Anyway I have a 996 Cup motor we are doing a leak down test on Monday that I may want to sell.
Send me a PM if you are interested.
#9
Addict
Rennlist Member
Rennlist Member
Silly question -
Is GTSU a national class again?
I originally ran GTSU and then NASA made it regional at least here so you couldnt run GTSU at Nationals which is why I switched to SU....
GTS was a great group of guys too as are the ST guys...
Is GTSU a national class again?
I originally ran GTSU and then NASA made it regional at least here so you couldnt run GTSU at Nationals which is why I switched to SU....
GTS was a great group of guys too as are the ST guys...
#13
Rennlist Member
In summary....
They raised the GTS5 class weight/HP ratio from 6.5 to 7.2, and left the other classes alone. It appears they're trying to force the later model 2010 cups into GTSU while allowing 6 & 7 cups to run in GTS5. At 2775 lbs, it'll take no more than 375 rwhp to stay in GTS5 including the .2 factory race car penalty described below.
They raised the GTS5 class weight/HP ratio from 6.5 to 7.2, and left the other classes alone. It appears they're trying to force the later model 2010 cups into GTSU while allowing 6 & 7 cups to run in GTS5. At 2775 lbs, it'll take no more than 375 rwhp to stay in GTS5 including the .2 factory race car penalty described below.
#14
#15
Rennlist Member
Join Date: Feb 2004
Location: Baltimore, MD
Posts: 158
Likes: 0
Received 0 Likes
on
0 Posts
I will get bumped to GTSU as well with this since I barely squeeked by in GTS5 before. I just had my normally aspirated motor built last year so that it would be at the GTS5 limit... sort of blows. The bummer here is the forced induction well built GT cars will rule the roost since there are no rules on weight or horsepower...if they can drive.