WTB Nitrogen hose and 450 psi Nitrogen regulator
#47
Rennlist Member
I have had bubbles form in two different Gorilla hoses, each rated for 500 PSI but used at pressures less than that. I'm changing to the pressure washer hose.
#48
Rennlist Member
I had my local Hydraulics company make up a custom line with all the right fittings . Best part is I had it cut to the length I wanted and its good for something like 2,000 psi . No need to worry about bleeding it down to stop bursting. Cost under $200 with all the fittings
#49
Rennlist Member
after having a second regulator fail I have decided its time to bite the bullet and get the Paoli B.40.0002.
I am also thinking while I am at it to get a hose from them.
I do find it interesting that most of you guys have been able to get away with a 450 psi reg as I cant even get the rear to budge at 450 psi.
I need 5-550 to get the car off the ground.
that regulator if I do the math right is mid 600 bucks but we have spent that on supposedly good 600 psi rated regulators that have failed already
I am also thinking while I am at it to get a hose from them.
I do find it interesting that most of you guys have been able to get away with a 450 psi reg as I cant even get the rear to budge at 450 psi.
I need 5-550 to get the car off the ground.
that regulator if I do the math right is mid 600 bucks but we have spent that on supposedly good 600 psi rated regulators that have failed already