lights in the trunk area
#16
#18
I installed these in the cargo area... they help quite a bit, but the effect is incremental, not revolutionary
4x Error Free White Footwell Lights
4x Error Free White Footwell Lights
These worked great. It's funny because when you pull out the housing for the lights, there is an Audi logo on them.
The following 3 users liked this post by jobunaga:
#19
Here is the instruction sheet from the eBay product listing. It is not in English, but the pictures are pretty clear. You are essentially snapping apart the light enclosure, removing the circuit board and replacing it with the new circuit board, and then snapping it all back together. No glue or screws involved...it is all a snap fit. Then of course just plug it back into the wiring harness. Hope this helps!
Now I'm goin to see if I can do this with the Porsche light that shows up on the street when I open the doors.
The following users liked this post:
schnell (02-19-2024)
#20
It's easy. trim tool to remove the light, disconnect the harness and replace with new puddle light version. Another 5 mins job.
The following users liked this post:
rdubu (02-20-2024)
#21
Well, I just gotta say that it was a BEAR for me to install those little boards. For the life of me, I could not get the clear part to snap back to the black part. I eventually got them back together, but it was not a piece of cake.
Contrast that to installing the Porsche logo puddle lights. Nothing to that! Pull the light out with your finger nail or credit card, disconnect the lead and plug in the new light. Easy as pie!
Contrast that to installing the Porsche logo puddle lights. Nothing to that! Pull the light out with your finger nail or credit card, disconnect the lead and plug in the new light. Easy as pie!
#23
#24
For future trunk light moders, this seems like exact same one ships from US.
Let's get them sold out. haha.
https://www.ebay.com/itm/17393910954...J7TAPCHVTE6FRH
The following users liked this post:
Larson E. Rapp (02-21-2024)
#27
Well, I just gotta say that it was a BEAR for me to install those little boards. For the life of me, I could not get the clear part to snap back to the black part. I eventually got them back together, but it was not a piece of cake.
Contrast that to installing the Porsche logo puddle lights. Nothing to that! Pull the light out with your finger nail or credit card, disconnect the lead and plug in the new light. Easy as pie!
Contrast that to installing the Porsche logo puddle lights. Nothing to that! Pull the light out with your finger nail or credit card, disconnect the lead and plug in the new light. Easy as pie!
Definitely a worthwhile mod but the instructions could be a lot better.
Last edited by Larson E. Rapp; 02-22-2024 at 12:33 AM.