What did you do to your GT4 today?
#2611
Had the Dundon intake runners installed along with the Cobb Tune stage 2 (it had the stage 1 before). I can’t wait to get it out on the track.
Last edited by RobC4sX51; 01-25-2021 at 09:49 PM.
The following 2 users liked this post by RobC4sX51:
Five12Free (01-25-2021),
Snowy999 (01-25-2021)
#2612
So much over the last two days!
- Took delivery via PlyCar transport from an awesome private seller in VA.
- Peeled off the Porsche decals - they were ok, but they had to go!
- Swapped out the summer wheels for my winter 19s
- Installed Zunsport side vent grills
- Installed AWE foiler wind diffusers
- Set the wing and undercarriage to full aero
- Set up the satellite radio (still not working)
- Installed MillWorks USA front plate holder
- Made sure my golf clubs fit in the hatch (they do)
- Installed driver's side TrackSpec seat angle brackets. Had to pull the seat out for this. Tried doing it in situ, but I couldn't make it happen. . Passenger side some other time.
The following 3 users liked this post by mgordon18:
#2614
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Joined: Mar 2017
Posts: 2,506
Likes: 694
From: Philadelphia, Pennsylvania
Installed our full Performance lineup on a GT4 this week, Sound and power gains are phenomenal.
Our Performance Lineup includes Headers, OAP, and Valvetronic exhaust will check those boxes. Weight savings of over 30 lbs, incredible sound, and will gain 30+ WHP.
Check out our newest video to hear it for yourself.
Our Performance Lineup includes Headers, OAP, and Valvetronic exhaust will check those boxes. Weight savings of over 30 lbs, incredible sound, and will gain 30+ WHP.
Check out our newest video to hear it for yourself.
The following 2 users liked this post by GeoJoe:
RolloGigolo (02-05-2021),
Snowy999 (02-07-2021)
#2616
I installed a Joyeauto Apple CarPlay and aspherical mirrors.
The previous owner had a backup camera installed with a different interface. I removed the old interface and plugged the camera RCA into the Joyeauto interface and it worked perfectly!
Regular (flat) mirror
Aspherical mirror. No more blind spot!
The previous owner had a backup camera installed with a different interface. I removed the old interface and plugged the camera RCA into the Joyeauto interface and it worked perfectly!
Regular (flat) mirror
Aspherical mirror. No more blind spot!
The following 2 users liked this post by colnagoG60:
sonorous (02-05-2021),
Soul Performance (02-08-2021)
#2619
Aspherical mirrors are how mirrors should be. These are what they install on cars in rest of world. They greatly reduce the blind spot. Looks much better than those stick on convex mirrors.
It’s the first “mod” I do on all my cars. See below for part numbers. I ordered them from Suncoast Porsche. They were about $175 per side.
super easy to change. Takes 10 sec. adjust mirror so it is in it’s most “in” position, then put your fingers behind the outer edge of the mirror glass and pull it out. There are two wires to unplug for the heated mirror, just plug these wires into the new mirror and press the new mirror into place. You are good to go.
It’s the first “mod” I do on all my cars. See below for part numbers. I ordered them from Suncoast Porsche. They were about $175 per side.
super easy to change. Takes 10 sec. adjust mirror so it is in it’s most “in” position, then put your fingers behind the outer edge of the mirror glass and pull it out. There are two wires to unplug for the heated mirror, just plug these wires into the new mirror and press the new mirror into place. You are good to go.
Last edited by spyderdoc; 02-05-2021 at 06:37 PM.
The following users liked this post:
Daintee (02-13-2021)
#2620
Aspherical mirrors are how mirrors should be. These are what they install on cars in rest of world. They greatly reduce the blind spot. Looks much better than those stick on convex mirrors.
It’s the first “mod” I do on all my cars. See below for part numbers. I ordered them from Suncoast Porsche. They were about $175 per side.
super easy to change. Takes 10 sec. adjust mirror so it is in it’s most “in” position, then put your fingers behind the outer edge of the mirror glass and pull it out. There are two wires to unplug for the heated mirror, just plug these wires into the new mirror and press the new mirror into place. You are good to go.
It’s the first “mod” I do on all my cars. See below for part numbers. I ordered them from Suncoast Porsche. They were about $175 per side.
super easy to change. Takes 10 sec. adjust mirror so it is in it’s most “in” position, then put your fingers behind the outer edge of the mirror glass and pull it out. There are two wires to unplug for the heated mirror, just plug these wires into the new mirror and press the new mirror into place. You are good to go.
There is a technique to setting up your mirrors that completely eliminates blind spots. Once I adjusted my mirrors for this, no accessories or mirror mods needed.
#2621
spyderdoc How was the install for the Joyeauto Apple CarPlay? Are you happy with the functionality? I also have the base CDR (non-Nav) and the choices for aftermarket Apple CarPlay are limited. I think you are only the second person I have seen retrofit CarPlay onto the base CDR 3.1. Kudo's to you and any additional info you might have on what you did would be a great asset for many of us in the community since info is somewhat scarce.
#2622
spyderdoc How was the install for the Joyeauto Apple CarPlay? Are you happy with the functionality? I also have the base CDR (non-Nav) and the choices for aftermarket Apple CarPlay are limited. I think you are only the second person I have seen retrofit CarPlay onto the base CDR 3.1. Kudo's to you and any additional info you might have on what you did would be a great asset for many of us in the community since info is somewhat scarce.
#2623
Aspherical mirrors are how mirrors should be. These are what they install on cars in rest of world. They greatly reduce the blind spot. Looks much better than those stick on convex mirrors.
It’s the first “mod” I do on all my cars. See below for part numbers. I ordered them from Suncoast Porsche. They were about $175 per side.
super easy to change. Takes 10 sec. adjust mirror so it is in it’s most “in” position, then put your fingers behind the outer edge of the mirror glass and pull it out. There are two wires to unplug for the heated mirror, just plug these wires into the new mirror and press the new mirror into place. You are good to go.
It’s the first “mod” I do on all my cars. See below for part numbers. I ordered them from Suncoast Porsche. They were about $175 per side.
super easy to change. Takes 10 sec. adjust mirror so it is in it’s most “in” position, then put your fingers behind the outer edge of the mirror glass and pull it out. There are two wires to unplug for the heated mirror, just plug these wires into the new mirror and press the new mirror into place. You are good to go.
#2624
#2625
Would love to see how you did it. Did you just getting it directly from their website?