Australian GT4s
#1126
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
but the new 4.0 is out of this world! worth the price of admission for that alone
#1127
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
GT4 was traded for the .2 GT3, cannot help but think that the new .2 GT3 engine in a GT4 platform would be an ideal combination, although have not tracked the new GT3 yet, so far I prefer the size and driving dynamics of the GT4.
but the new 4.0 is out of this world! worth the price of admission for that alone
but the new 4.0 is out of this world! worth the price of admission for that alone
A 500hp 4L in a GT4 would be epic. Deman have done a GT4 Stroker kit which takes it to a 4L and approx. 500hp.
Looking forward to seeing it out at the Burrows Day. I should be there on the March 8th one.
#1128
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Any of these parts you would recommend as a must that transformed the car and help reduce times?
I already have the rear toe links, but unsure how much of a difference the other suspension components make.. Front/Rear drop links, CMS Sway Bars, BBI Bump Steer Rods, Thrust Arms, & Bushing Kit.
The DSC controller is also tempting but I haven't had 3 gear failure yet. Any reason Porsche could not warrant a 3rd gear failure if I added the DSC controller?
I already have the rear toe links, but unsure how much of a difference the other suspension components make.. Front/Rear drop links, CMS Sway Bars, BBI Bump Steer Rods, Thrust Arms, & Bushing Kit.
The DSC controller is also tempting but I haven't had 3 gear failure yet. Any reason Porsche could not warrant a 3rd gear failure if I added the DSC controller?
I am a huge fan of the monoball bits, as they provide you the feel with almost no concessions around NVH. I have used them on all of my Porsches in the past, and if you search for every last tenth then they certainly help. Confidence and feel is where the lap time comes from.
I haven't fitted the front bar (Warwick has) but the rear made a huge difference for me. So my front is new and unused but Warwick likes them both apparently. The GT4 rolls way too much (soft springs) and the bars help that certainly. Again the faster you go the more you notice this, so its all relative. The faster you go the more these parts make a difference. Plus with the monoball bits if you do one part you might as well do them all, That's why I did them all.
DSC Controller is a must in my opinion, and it's a 10 min swap and will cause you no issue when 3rd gear fails, or you just swap it back out, very easy to do.
I upgraded the rotors and pads purely for longevity as Porsche rotors wear very fast. The girodiscs last a long time and have much better cooling (72 vanes). braking performance didn't really change much, as the softer Porsche rotor do bite hard, but save the expensive Porsche rotors for the street. The DS11'1 pads feel better than the stock pads also, more consistent. With the upgraded rotors brake temps are much reduced after each session.
My plenum, Headers and Evolve Techniq tune however blew me away. My power graphs speak for themselves...Couldn't recommend them highly enough. The standard car feels like the handbrake is on until 5000rpm, where as now it pulls hard and from low down. 430hp easily...
The extra aero bits certainly have slowed me down the straight by a few km/h but you can feel it in the turns. My speed through turn 1 is a prime example.
But like anything Charlie you can throw lots of parts at a car, but you need to push to extract the benefit of these bits, its a very slippery slope mate.
#1129
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
I've entered the full Mountain Motorsports tarmac rally series in the Super Sports Class this year. Means I can run just the factory half cage but am speed limited to 140km/hr. But having done 3 years of Targa Tas I know that 140km/hr is plenty fast enough to have fun where it counts.
I'll definitely be back for Bathurst in November too.
mungee - I could be keen on a few of your parts too.
I'll definitely be back for Bathurst in November too.
mungee - I could be keen on a few of your parts too.
#1130
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
At Bathurst I was also about 10km/hr slower down Conrod but I was 1s faster across the top. The net result at both tracks has been pretty much identical lap times though with and without the aero. But I think the aero looks cool and you definitely feel like the car behaves better even if it isn't any faster. So I'm leaving all of mine on..
#1132
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Charlie,
DSC Controller is a must in my opinion, and it's a 10 min swap and will cause you no issue when 3rd gear fails, or you just swap it back out, very easy to do.
The extra aero bits certainly have slowed me down the straight by a few km/h but you can feel it in the turns. My speed through turn 1 is a prime example.
But like anything Charlie you can throw lots of parts at a car, but you need to push to extract the benefit of these bits, its a very slippery slope mate.
DSC Controller is a must in my opinion, and it's a 10 min swap and will cause you no issue when 3rd gear fails, or you just swap it back out, very easy to do.
The extra aero bits certainly have slowed me down the straight by a few km/h but you can feel it in the turns. My speed through turn 1 is a prime example.
But like anything Charlie you can throw lots of parts at a car, but you need to push to extract the benefit of these bits, its a very slippery slope mate.
Can you PM the price for the DSC controller and Aero parts and I will do some research on the other bits.
Thanks.
Yeah I have them. I'm 10km/hr slower down the main straight at PI but 10km/hr faster through T1.
At Bathurst I was also about 10km/hr slower down Conrod but I was 1s faster across the top. The net result at both tracks has been pretty much identical lap times though with and without the aero. But I think the aero looks cool and you definitely feel like the car behaves better even if it isn't any faster. So I'm leaving all of mine on..
At Bathurst I was also about 10km/hr slower down Conrod but I was 1s faster across the top. The net result at both tracks has been pretty much identical lap times though with and without the aero. But I think the aero looks cool and you definitely feel like the car behaves better even if it isn't any faster. So I'm leaving all of mine on..
#1133
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
No more than 30 for me as the car gets very greasy for me anything above that. I usually try to run 29 hot. But be careful as some gauges vary as I have discovered. And 29 on mine might be 30 on your etc etc. At the last supersprint Hamilton's, mine and another gauge all showed 3 differing results, 1/2 -1 pound between them all.
#1134
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
I ran the GT4 at Barbagello for the first time in the GT4. Wow, now I see what everyone is saying about the tall gears. It was ridiculous. 2nd / 3rd / 4th, WTF...
Also ran the Trofeo R's, miles ahead of Pilot Sxxx and Maxx. Fantastic road rubber, but A050 they are not... Hit 1.46 lateral G's. yeehaaaa.
Also ran the Trofeo R's, miles ahead of Pilot Sxxx and Maxx. Fantastic road rubber, but A050 they are not... Hit 1.46 lateral G's. yeehaaaa.
#1135
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
All,
I am about to list the following parts in classifieds but thought id reach out to the locals first. here is what I have for sale currently off my GT4. Prices are very good so we can both benefit. Photos are available if required so just PM me or you will the ad pop up on rennlist over the next couple of days.
BMC Filters & New Recharge Kit which is unused - $200
IPD Plenum & TB - $1200
Durametric Cable – Used once - $300
Brand new Cantrell Sub Bar - $200
I am about to list the following parts in classifieds but thought id reach out to the locals first. here is what I have for sale currently off my GT4. Prices are very good so we can both benefit. Photos are available if required so just PM me or you will the ad pop up on rennlist over the next couple of days.
BMC Filters & New Recharge Kit which is unused - $200
IPD Plenum & TB - $1200
Durametric Cable – Used once - $300
Brand new Cantrell Sub Bar - $200
Last edited by mungee; 03-05-2018 at 07:07 PM.
#1136
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Was out at Wakefield yesterday for PCNSW Supersprint and went home with a 1.05.33 which I am exteremly happy with. It came from the 2nd session of the day, but unfortunately the day was cut short due to an incident on the track and the track needing repairs and deemed unsafe. I think there is a 1.04 in it so will try get it in August when we are back there.
Here is a video of the lap.
Here is a video of the lap.
#1138
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
No chance they are going to buff it out. Unfortunate for the owner, apparently it is only 2 weeks old.
#1140
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
He went straight on at the fish-hook and into the tire wall. Because of the damage caused to the tire wall it wasn't structurally sound and was unsafe to continue with the day incase someone came off again in the same spot.
There were a few people taking photos of the car afterwards so some will probably find their way online.