Philly Members?
11-12-2020, 05:48 PM
#916
Rennlist Member
Welcome. I'm in Chester Springs area and have a .2 base cab GT Silver over Espresso w/ a brown top. If you ever see me, give a wave. I'd be interested in checking out Aqua in person. It looks great in pictures. How diffferent is it from Sapphire? If you are ever looking for a meet up, most saturdays from 8-11 there is a cars and coffee at Just Joes in Chester Springs on rt113. It gets a pretty interesting turn out.
I'd start by calling Performance Auto in Malvern. They're a great indy mechanic shop, so you may want to get to know them anyway. I am not 100% on whether they install accessories, but it's worth a call:
http://www.pfmauto.com/
I'd start by calling Performance Auto in Malvern. They're a great indy mechanic shop, so you may want to get to know them anyway. I am not 100% on whether they install accessories, but it's worth a call:
http://www.pfmauto.com/
Aqua looks great.. a bit darker than the name would imply (deep blue-ish) -- shines great under the light.
I'll try to hit up a C&C meet up on these days.
11-12-2020, 05:48 PM
#917
Rennlist Member
Welsome!
I too am in Chester Springs. If you ever see (or hear) a 991.2 Agate Grey coupe, give a wave!
I have been dealing with and have gotten to know Steve and the team from Bimmerworks in West Chester for over 12 years. They can work on any car (Audi, Porsche and he even has the tool for Lamborghini - Gallardo and Murci).
His team is definitely accustomed to working with high end cars. I ended up racing with Steve in a bunch of endurance races as well.
They will NOT be the cheapest shop, but it will be 100% correct and done right. Steve's senior tech, Chris is beyond meticulous when it comes to doing work.
That being said, he's had quite a few clients call him in a panic where the dealership is looking at $4,000-$5,000 of work on a particular car and Steve's team will look at it and find far less work required. He is fully transparent and will never ask to do work that isn't required. He's fully trustworthy.
For me and the vast majority of his clients, peace of mind that you can trust him and his team is worth it.
I just had my 911 there for a full exhaust and my Numeric shifter/cables install. They'll be doing my coil-overs in the next few weeks as well.
I too am in Chester Springs. If you ever see (or hear) a 991.2 Agate Grey coupe, give a wave!
I have been dealing with and have gotten to know Steve and the team from Bimmerworks in West Chester for over 12 years. They can work on any car (Audi, Porsche and he even has the tool for Lamborghini - Gallardo and Murci).
His team is definitely accustomed to working with high end cars. I ended up racing with Steve in a bunch of endurance races as well.
They will NOT be the cheapest shop, but it will be 100% correct and done right. Steve's senior tech, Chris is beyond meticulous when it comes to doing work.
That being said, he's had quite a few clients call him in a panic where the dealership is looking at $4,000-$5,000 of work on a particular car and Steve's team will look at it and find far less work required. He is fully transparent and will never ask to do work that isn't required. He's fully trustworthy.
For me and the vast majority of his clients, peace of mind that you can trust him and his team is worth it.
I just had my 911 there for a full exhaust and my Numeric shifter/cables install. They'll be doing my coil-overs in the next few weeks as well.
11-13-2020, 09:05 AM
#919
Rennlist Member
Hello fellow PA Rennlisters,
Also want to introduce myself -- just purchased a 991.1 C4S Cab (Aqua Blue / Luxor Beige). I am in the Wayne area and look forward meeting some of you at some point.
In the meantime, does anyone know of a good shop that would install one of the popular aftermarket backup cameras? Don't want to modify the car much, but I am finding that to be somewhat of a necessity (esp with cabrio visibility).
thanks!
Also want to introduce myself -- just purchased a 991.1 C4S Cab (Aqua Blue / Luxor Beige). I am in the Wayne area and look forward meeting some of you at some point.
In the meantime, does anyone know of a good shop that would install one of the popular aftermarket backup cameras? Don't want to modify the car much, but I am finding that to be somewhat of a necessity (esp with cabrio visibility).
thanks!
The following users liked this post:
NueveOnce (11-13-2020)
11-13-2020, 09:34 AM
#920
Rennlist Member
I ended up going the Tire Rack route and went with a set of SottoZero's mounted on 19" Flow One F2's. Ended up just under $3k, including mounting/balancing/TPMS/shipping and should suit the winter months with no issue.
The following users liked this post:
NueveOnce (11-13-2020)
11-13-2020, 09:37 AM
#921
Rennlist Member
Last edited by core22; 11-13-2020 at 09:39 AM.
11-13-2020, 09:46 AM
#922
Advanced
If the weather holds up (meaning no rain, although looks like it will be about 40 at 7am) I'll be there as well. 2013 black/black C4S with very lightly tinted windows. Been the past few weeks but I try to get there at or before 8am, and usually head out by 9:30 the latest.
11-13-2020, 02:53 PM
#923
Burning Brakes
This seems like a nice meet. Would love to make it there sometime soon.
Funny enough, I bought a new Z06 from Tom Oates a while back (2006).
11-14-2020, 07:40 AM
#924
SJW, a Carin' kinda guy
Rennlist Member
Rennlist Member
I am sure Goodman radio in Bryn Mawr could do the back up camera. They are very good. Nice choice on the cab. I am quite local to you so if you see my white over blue 993 C4 Cab or Auratium green GT3T do say hi/wave. 
The following users liked this post:
NueveOnce (11-14-2020)
11-14-2020, 09:29 AM
#925
Instructor
Rotors needed for a project
I am looking for a used pair of porsche drilled rotors for a table I am building. Just concerned with appearance, not function.
Anyone near media/Drexel hill have any?
Anyone near media/Drexel hill have any?
11-14-2020, 09:43 PM
#926
Racer
I do not have any, but please post up pics when you get it done. I like seeing what people com up with for this type of stuff.
12-12-2020, 10:50 AM
#927
Racer
Anyone around Doylestown area have a PSS9 spanner wrench I can borrow??? I need a little droppy droppy....but no wrenchy wrenchy.
12-14-2020, 01:28 PM
#928
Burning Brakes
12-14-2020, 02:15 PM
#929
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Regards,
John Gaydos
__________________
SOUL PERFORMANCE PRODUCTS
Quality Exhaust Solutions, Fair Pricing, and Outstanding Service
John Gaydos- Owner, Performance Specialist
Cell - (484) 883-6197
johng@soulpp.com
Jon Wheel - Marketing Manager
jwheel@soulpp.com
SOUL PERFORMANCE PRODUCTS
Quality Exhaust Solutions, Fair Pricing, and Outstanding Service
John Gaydos- Owner, Performance Specialist
Cell - (484) 883-6197
johng@soulpp.com
Jon Wheel - Marketing Manager
jwheel@soulpp.com
