Aim Solo DL Can bus
10-19-2016, 05:13 PM
#1
Rennlist Member
Thread Starter
Join Date: Jun 2013
Location: Orange County
Posts: 222
Likes: 0
Received 0 Likes
on
0 Posts
Aim Solo DL Can bus
I am currently running my Solo DL on my 997.2 Turbo thru the OBD port and want to convert over to can bus. Does someone sell just the can bus cable alone?
Alternately I have the can bus cable in my .2 RS that I could switch over. Anyone know if the .2rs and .2 turbo use the same cable?
Alternately I have the can bus cable in my .2 RS that I could switch over. Anyone know if the .2rs and .2 turbo use the same cable?
10-19-2016, 06:14 PM
#2
Rennlist
Basic Site Sponsor
Basic Site Sponsor
Join Date: Jun 2008
Location: Durham, NC and Virginia International Raceway
Posts: 19,097
Received 3,270 Likes
on
1,865 Posts
CAN cable for the Solo DL is the same thing for all cars.
Be glad (or Matt, or Jerry) to sell you one for $45 plus $6.80 USPS shipping.
Be glad (or Matt, or Jerry) to sell you one for $45 plus $6.80 USPS shipping.
__________________
-Peter Krause
www.peterkrause.net
www.gofasternow.com
"Combining the Art and Science of Driving Fast!"
Specializing in Professional, Private Driver Performance Evaluation and Optimization
Consultation Available Remotely and at VIRginia International Raceway
-Peter Krause
www.peterkrause.net
www.gofasternow.com
"Combining the Art and Science of Driving Fast!"
Specializing in Professional, Private Driver Performance Evaluation and Optimization
Consultation Available Remotely and at VIRginia International Raceway
10-20-2016, 07:32 PM
#3
Rennlist Member
Hey - if you'll be at Matt's thing happy to give a hand getting this setup/wiring if needed...
10-20-2016, 09:01 PM
#4
Rennlist
Basic Site Sponsor
Basic Site Sponsor
Join Date: Jun 2008
Location: Durham, NC and Virginia International Raceway
Posts: 19,097
Received 3,270 Likes
on
1,865 Posts
He'll have it Wednesday, Thursday at the latest.
10-20-2016, 09:04 PM
#5
Rennlist Member
Thread Starter
Join Date: Jun 2013
Location: Orange County
Posts: 222
Likes: 0
Received 0 Likes
on
0 Posts
10-20-2016, 11:32 PM
#6
Rennlist
Basic Site Sponsor
Basic Site Sponsor
Join Date: Jun 2008
Location: Durham, NC and Virginia International Raceway
Posts: 19,097
Received 3,270 Likes
on
1,865 Posts
I'll email you info plus spyerx via email.
10-22-2016, 01:39 AM
#7
Rennlist Member
Hi you wrote:
If you have a data that the AIM receives but you don't see them on the video then you problem is not with the cable but with the setup of the AIM/SmartyCam
If you are not getting all data (example oil temp) that you'd like to see then tapping into the CAN bus is the way to go.
If you are not getting all data (example oil temp) that you'd like to see then tapping into the CAN bus is the way to go.
Trending Topics
10-22-2016, 07:49 AM
#8
Rennlist
Basic Site Sponsor
Basic Site Sponsor
Join Date: Jun 2008
Location: Durham, NC and Virginia International Raceway
Posts: 19,097
Received 3,270 Likes
on
1,865 Posts
Just so everyone knows, there is still no guarantee that EVERY channel on the protocol list comes through. AiM has it outlined in red on the bottom of the page. They do for the most part.
10-22-2016, 01:47 PM
#9
Rennlist Member
Cool I'll have my laptop happy to get it sorted for you. Email me if you won't be connecting the can and power wires prior.