Would you guys condsider V8 cayennes timebombs?
#106
Drifting
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
The best way to avoid the issue is to avoid cold starts in super cold climates by keeping the vehicle indoors. This is near impossible in some climates and thats why we see so much of this issue from Canadian Porsches. With the Cayenne being a year round vehicle these issues show up more with the engines than with 911s and etc that are seldom driven in inclimate weather.
The other issue is from a lubrication standpoint. However, my input on this topic is very biased and generally biased as I assist with the development of Driven Racing Oils offered by Joe Gibbs. Any input from a lubrication standpoint would take us way off topic.
The other issue is from a lubrication standpoint. However, my input on this topic is very biased and generally biased as I assist with the development of Driven Racing Oils offered by Joe Gibbs. Any input from a lubrication standpoint would take us way off topic.
Same for negative numbers, pretty rare. Most of the winter is in the upper teens low twenties.
I know parts of Canada can get to -20s F for a typical winter..
Just out of curiosity, does Porsche do anything better with a remanufactured engine for a 996 from 2008? Do they do anything to the IMS bearings?
#107
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
It's going to be -35 Celsius tonight (about -30 Fahrenheit) with a -52 wind chill. There are no block heaters for the Cayenne so only a pan heater on my S. I've been starting it and warming it every few hours so it doesn't get too cold. I assume I'm going to be talking to Flat6 Innovations at some point in the future!
#108
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Interesting about the ambient temps being a factor. I first noticed the ticking sound on my old S while on a ski trip in the Cascades.
Flat 6, not to veer off topic too much, but since you compared the V8s to other Porsche engines ie M96, etc., what is your overall experience with the Cayenne V6 DFI compare to these engines?
Flat 6, not to veer off topic too much, but since you compared the V8s to other Porsche engines ie M96, etc., what is your overall experience with the Cayenne V6 DFI compare to these engines?
#109
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Do you know how much the coats are if I change the material?