Sport Technos on eBay
#1
Racer
Thread Starter
Sport Technos on eBay
Those of you looking to upgrade your wheel/tire combo, check it out...
http://cgi.ebay.com/ebaymotors/PORSC...45271228QQrdZ1
I wish this opportunity had been around before I bought my 20-inch OZ's
http://cgi.ebay.com/ebaymotors/PORSC...45271228QQrdZ1
I wish this opportunity had been around before I bought my 20-inch OZ's
#3
Racer
Thread Starter
Kinda hard to tell in a 2D picture...send him an email and he should disclose whether they are staggered or not.
Here is another one:
http://cgi.ebay.com/ebaymotors/PORSC...44989164QQrdZ1
Here is another one:
http://cgi.ebay.com/ebaymotors/PORSC...44989164QQrdZ1
#4
Super Moderator
Needs More Cowbell
Lifetime Rennlist
Member
Needs More Cowbell
Lifetime Rennlist
Member
Sport Technos can be installed 9" on all 4 corners or 9" in the front and 10" in the rear.
Refer to the bottom of this page for P/N and descriptions:
http://www.porsche.com/international.../wheels/table/
Refer to the bottom of this page for P/N and descriptions:
http://www.porsche.com/international.../wheels/table/
#6
Originally Posted by Budget M3
Those of you looking to upgrade your wheel/tire combo, check it out...
http://cgi.ebay.com/ebaymotors/PORSC...45271228QQrdZ1
I wish this opportunity had been around before I bought my 20-inch OZ's
http://cgi.ebay.com/ebaymotors/PORSC...45271228QQrdZ1
I wish this opportunity had been around before I bought my 20-inch OZ's
#7
Racer
Thread Starter
Thanks, Kooser...they DO look good. Only minor issue with the OZ's is that the OEM caps do not fit, and I cannot find an aftermarket version for Porsche...
Trending Topics
#8
Originally Posted by Budget M3
Thanks, Kooser...they DO look good. Only minor issue with the OZ's is that the OEM caps do not fit, and I cannot find an aftermarket version for Porsche...
The guys at wheel enhancement.com would be your best solution.
If it is not available they might be able to fashion something for you.
Otherwise...PROUDLY display he OZ ones!
FUCHS = 70mm opening
OEM = 60mm opening
#9
Racer
Thread Starter
Originally Posted by Kooser
What is the internal diameter of the opening for the OZ's?
The guys at wheel enhancement.com would be your best solution.
If it is not available they might be able to fashion something for you.
Otherwise...PROUDLY display he OZ ones!
FUCHS = 70mm opening
OEM = 60mm opening
The guys at wheel enhancement.com would be your best solution.
If it is not available they might be able to fashion something for you.
Otherwise...PROUDLY display he OZ ones!
FUCHS = 70mm opening
OEM = 60mm opening
#10
Man of Many Porsches
Rennlist Member
Rennlist Member
Originally Posted by Budget M3
Thanks, Kooser...they DO look good. Only minor issue with the OZ's is that the OEM caps do not fit, and I cannot find an aftermarket version for Porsche...
Last edited by alex911s; 04-02-2015 at 02:56 AM.
#11
Originally Posted by alex911s
Contact oproulx from 6speed, here's his car, with Porsche cap
#12
Yeah I need caps for my new 20 x 10" TSW Montage... opening is about 2.5" or 64mm
BTW, check out the rim protector on the tire, that's a 10" wide wheel and a 275/40... literally I don't think you could contact a curb even if you tried. It's a Hankook Ventus ST... a pretty decent tire from what I've read.
Like em? Oh and they're 65# or the same or a bit lighter than Sport TEchno/Diamari... hyper silver spokes/center and polished lips...
BTW, check out the rim protector on the tire, that's a 10" wide wheel and a 275/40... literally I don't think you could contact a curb even if you tried. It's a Hankook Ventus ST... a pretty decent tire from what I've read.
Like em? Oh and they're 65# or the same or a bit lighter than Sport TEchno/Diamari... hyper silver spokes/center and polished lips...
#13
Originally Posted by charlieXS
Yeah I need caps for my new 20 x 10" TSW Montage... opening is about 2.5" or 64mm
BTW, check out the rim protector on the tire, that's a 10" wide wheel and a 275/40... literally I don't think you could contact a curb even if you tried. It's a Hankook Ventus ST... a pretty decent tire from what I've read.
Like em? Oh and they're 65# or the same or a bit lighter than Sport TEchno/Diamari... hyper silver spokes/center and polished lips...
BTW, check out the rim protector on the tire, that's a 10" wide wheel and a 275/40... literally I don't think you could contact a curb even if you tried. It's a Hankook Ventus ST... a pretty decent tire from what I've read.
Like em? Oh and they're 65# or the same or a bit lighter than Sport TEchno/Diamari... hyper silver spokes/center and polished lips...
As of right now I don't have any answers for the wheel center cap though.
#14
Originally Posted by Kooser
Niiiiiice. Now that is what I'm talking about. The wheel has a bit of a lip and the spokes are recessed a bit -With a bit of rubber form the tire this all translates to better protection from marring and scratches. Did you get a decent price on these?
As of right now I don't have any answers for the wheel center cap though.
As of right now I don't have any answers for the wheel center cap though.
I still "may" do some premium 22" wheels... but for now I just couldn't stand driving around on those 17" tires... this should be nice for performance, looks and ride...
I'm still debating the springs... my dealers have given me the BIG thumbs down with regards to warranty implications. Once upon a time I thought well heck It'll be 1.5 years before I even have to take it in for a service so I'll mod it. Looking around this forum it appears she may be in the shop a bit MORE often.
It seems that if I have problems with struts, suspension parts, brakes or steering they'll just blame my springs
Wish I could mod some 5 star Cayenne Sport Design color crest center caps to fit.
#15
Super Moderator
Needs More Cowbell
Lifetime Rennlist
Member
Needs More Cowbell
Lifetime Rennlist
Member
Perhaps these folks can assist with your center cap request/requirements:
http://www.boothedesign.com/centercaps.html
http://www.boothedesign.com/centercaps.html