new member
The following users liked this post:
RS-America (03-21-2023)
#2
Rennlist Member
Welcome to the forum!
You will find there is a treasure of info and really kind and generous people here.
titanium edition is rare. I hope you love the new ride.
what’s on your list of upkeep and mods?
You will find there is a treasure of info and really kind and generous people here.
titanium edition is rare. I hope you love the new ride.
what’s on your list of upkeep and mods?
#3
Welcome! Enjoy the car.
#5
Cruisin'
Thread Starter
Thank you for the welcomes. No mods yet. Trying to find CAI but cant. I have seen DIY CAI but unsure if thats going to be good. Would like to do exhaust as well and maybe chip. Trying to find new tires but no one seems to know how much wider I can go I have 255/65/18
#6
Rennlist Member
CAI… cold air inlet? EVOMS Evolution Motorsports has good stuff I thnk (if you can get a hold of them). they do a tune too. Sam is really knowledgeable and helpful, but I’m unsure if he is reachable. Not sure what us up there?
A few other suppliers as well.
tire width will eventually be limited by the spindle nut on the inside and the forward fender well at the turbos on the outside.
I know 295/35r20 works on factory offset turbo wheels 9inch et60 fronts. (Rear is 10 x et55, but unlikely to be an issue). That’s rather beefy, width-wise. I’ll likely do something similar for summers.
the off-road guys find that up at about 32” we have issues, depending on width, offset, sag of the body mounts, etc.
I have to imagine slightly wider without going taller would be okay. But watch out for that spindle nut.
search for the off-road tires thread. Lots of discussion.
here is a chart for off-road tire sizes. Consume with salt.
A few other suppliers as well.
tire width will eventually be limited by the spindle nut on the inside and the forward fender well at the turbos on the outside.
I know 295/35r20 works on factory offset turbo wheels 9inch et60 fronts. (Rear is 10 x et55, but unlikely to be an issue). That’s rather beefy, width-wise. I’ll likely do something similar for summers.
the off-road guys find that up at about 32” we have issues, depending on width, offset, sag of the body mounts, etc.
I have to imagine slightly wider without going taller would be okay. But watch out for that spindle nut.
search for the off-road tires thread. Lots of discussion.
here is a chart for off-road tire sizes. Consume with salt.
Last edited by Crozzer; 03-21-2023 at 10:08 AM.
Trending Topics
The following users liked this post:
j365 (03-22-2023)