WTB Turbo Exhaust ???
12-10-2012 | 06:46 PM
#17
Rennlist Member
Joined: Dec 2004
Posts: 1,282
Likes: 5
From: Athens, Greece
Congrats and welcome. Looking good I must say.
I am also part of the europipe believers and owner. Even used its an expensive piece of kit. Got mine used as well and it was and is best mod. Do a search there is plenty of reading.
On a cab, as doc pointed out be careful choosing... Take your time. Research is half the fun.
On wheels consider spacers as well, 7mm front and 15 back will push the wheels out to the proper place. And then you will be tempted by a set of lowering springs. I went with H&R and have been very pleased.
Here is my first post on my black painted wheels two years ago and a DYI on painting the center caps to match.
HERE
Good luck
I am also part of the europipe believers and owner. Even used its an expensive piece of kit. Got mine used as well and it was and is best mod. Do a search there is plenty of reading.
On a cab, as doc pointed out be careful choosing... Take your time. Research is half the fun.
On wheels consider spacers as well, 7mm front and 15 back will push the wheels out to the proper place. And then you will be tempted by a set of lowering springs. I went with H&R and have been very pleased.
Here is my first post on my black painted wheels two years ago and a DYI on painting the center caps to match.
HERE
Good luck
12-10-2012 | 06:54 PM
#18
Thread Starter
Former Vendor
Joined: Mar 2007
Posts: 3,670
Likes: 5
From: Jacksonville, FL
Congrats and welcome. Looking good I must say.
I am also part of the europipe believers and owner. Even used its an expensive piece of kit. Got mine used as well and it was and is best mod. Do a search there is plenty of reading.
On a cab, as doc pointed out be careful choosing... Take your time. Research is half the fun.
On wheels consider spacers as well, 7mm front and 15 back will push the wheels out to the proper place. And then you will be tempted by a set of lowering springs. I went with H&R and have been very pleased.
Here is my first post on my black painted wheels two years ago and a DYI on painting the center caps to match.
HERE
Good luck
I am also part of the europipe believers and owner. Even used its an expensive piece of kit. Got mine used as well and it was and is best mod. Do a search there is plenty of reading.
On a cab, as doc pointed out be careful choosing... Take your time. Research is half the fun.
On wheels consider spacers as well, 7mm front and 15 back will push the wheels out to the proper place. And then you will be tempted by a set of lowering springs. I went with H&R and have been very pleased.
Here is my first post on my black painted wheels two years ago and a DYI on painting the center caps to match.
HERE
Good luck
Hmmm. Never thought about spacers for the wheels. They came stock on the rear of the RS .1.
Black rims. Sweet! Now your talkin'!
12-11-2012 | 01:28 AM
#20
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Joined: May 2001
Posts: 2,448
Likes: 354
From: NH
Nothing used at the moment, but I'll keep you in mind if something comes up. Ocasionally, we have a customer change muffler sound versions, either up or down in loudness . When this occurs, we end up with a used muffler (as we will take a muffler in trade for an original owner) and pair it with all new hardware and discount the system...
__________________
991.2 GT3 RS Weissach Racing Yellow
991.2 Turbo S GT Silver
991.2 GT3 Chalk (Manual)
2022 Cayenne White
former 1972 911T white, 1984 911 3.2 Targa black, 993 cab white, 993TT arena red, 993TT silver, 996TT speed yellow, 991.1 GT3 white
www.speedtechexhausts.com
info@speedtechexhausts.com
Testimonials SpeedTech Exhaust Videos facebook
991.2 GT3 RS Weissach Racing Yellow
991.2 Turbo S GT Silver
991.2 GT3 Chalk (Manual)
2022 Cayenne White
former 1972 911T white, 1984 911 3.2 Targa black, 993 cab white, 993TT arena red, 993TT silver, 996TT speed yellow, 991.1 GT3 white
www.speedtechexhausts.com
info@speedtechexhausts.com
Testimonials SpeedTech Exhaust Videos facebook
12-12-2012 | 06:02 PM
#21
Thread Starter
Former Vendor
Joined: Mar 2007
Posts: 3,670
Likes: 5
From: Jacksonville, FL
Yeah, have two of them now. I'm not tracking the turbo though and won't mod much either. Just wanna do a few things to make it my own.
12-12-2012 | 06:02 PM
#22
Thread Starter
Former Vendor
Joined: Mar 2007
Posts: 3,670
Likes: 5
From: Jacksonville, FL
Nothing used at the moment, but I'll keep you in mind if something comes up. Ocasionally, we have a customer change muffler sound versions, either up or down in loudness . When this occurs, we end up with a used muffler (as we will take a muffler in trade for an original owner) and pair it with all new hardware and discount the system...
