18 " vs 19" wheels on the track?
#49
Former Vendor
Actually, because of the way forgings are manufactured, several 19's will have less clearance than 18's, with the barrel being a smaller diameter. Either way, there is usually more than enough air moving around that heat from the brakes is not an issue.
#50
Rennlist Member
Concerned about heat dissipation when parked in garage bay after coming off the track. Trying to keep PCCB's as cool as possible and was concerned about a tighter clearance wheel holding that heat in. Good to know that some 18" forged wheels have more clearance than non-forged 19's!
#53
I'm planning on running OZ allegerita wheels on the car for track only in an 18X8 and 18X12 size.
Tire Rack is suggesting the Toyo Proxes R888 in 245/40/18 and 305/35/18.
I can also order the wheels from them and Nittos from another vendor but am curious about anyone with experience with the Toyos?
Any problem with the OZ wheels?
Thanks
Bill
Tire Rack is suggesting the Toyo Proxes R888 in 245/40/18 and 305/35/18.
I can also order the wheels from them and Nittos from another vendor but am curious about anyone with experience with the Toyos?
Any problem with the OZ wheels?
Thanks
Bill
#54
Rennlist Member
I'm planning on running OZ allegerita wheels on the car for track only in an 18X8 and 18X12 size. Tire Rack is suggesting the Toyo Proxes R888 in 245/40/18 and 305/35/18. I can also order the wheels from them and Nittos from another vendor but am curious about anyone with experience with the Toyos? Any problem with the OZ wheels? Thanks Bill
#55
Rennlist Member
Whoa oh... just ordered a set and were delivered friday last week from discount tire direct. See they're out now. if the latter end of that estimate i'll be running r888 at some events.
#56
Burning Brakes
#57
#58
Rennlist Member
#59
Rennlist Member