WTB: Center Lock Wheels GT3RS fitment
07-25-2011, 02:32 PM
#46
Race Director
Thread Starter
I just want to clear up some information on what offsets Forgeline builds in Porsche Centerlock fitments. Our standard fitments are below. Of course we could always make a custom offset if needed, however it would take a couple weeks longer than our standard 2-3 week build time to complete. Let me know if you have any questions regarding these fitments, I would glad to help with whatever you need.
In my opinion the 9 at +46 on the front of a GT3 or GTS will be quite aggressive unless you have 2 or 3 degrees of camber dialed into it.
GA3R, GWC3R, GZ3R,
18 or 19x9 +51 (GT3)
18 or 19x9 +47 (GT3RS)
18 or 19x12 +59 (GT3)
18 or 19x12 +47 (GT3RS)
DE3S, MD3S, SP3S, SO3S, etc…
19x8.5 +51 (GT3)
19x9 +47 (GT3RS)
19x12 +62 (GT3)
19x12 +50 (GT3RS)
In my opinion the 9 at +46 on the front of a GT3 or GTS will be quite aggressive unless you have 2 or 3 degrees of camber dialed into it.
GA3R, GWC3R, GZ3R,
18 or 19x9 +51 (GT3)
18 or 19x9 +47 (GT3RS)
18 or 19x12 +59 (GT3)
18 or 19x12 +47 (GT3RS)
DE3S, MD3S, SP3S, SO3S, etc…
19x8.5 +51 (GT3)
19x9 +47 (GT3RS)
19x12 +62 (GT3)
19x12 +50 (GT3RS)
I'm going with the Competiton Series WC3R wheel for my Carrera GTS (Turbo Widebody car):
9x19 et51
12x19 et50
add the Porsche TPMS
either R888 or Pirelli $$$Corsa's$$$...not sure yet but I will probably be ordering these this week or early next week.
