WTB: Center Lock Wheels GT3RS fitment
#31
Rennlist Member
Dispite the wider front, you don't have the stick on fender parts and thus RS wheels will extend way beyond your fenders....
#32
Race Director
Thread Starter
Forgot your going wider in the rear... On re-think, I think Izzone is on the money 100%... Gt3 fronts, RS rears... Just do a test fit with wheels of someone's car or ask dealer to slap on some GT3, RS wheels to confirm and you should be good.
Dispite the wider front, you don't have the stick on fender parts and thus RS wheels will extend way beyond your fenders....
Dispite the wider front, you don't have the stick on fender parts and thus RS wheels will extend way beyond your fenders....
#33
After looking at PET (spindles, hubs Cl nuts are the same thing on GTS and GT3RS) from my dealer and talking to wheel people and knowledgable Porsche techs all I need is GT3RS/Turbo rears 12x19 et48 rears and GT3/Carrera fronts 9x19 et51 or 8.5x19 et 53....right around those offsets but yes a 47or48 offset that is on a GT3RS will cause the wheels to stick out, thus why the RS has the stick on fender arches. Suspension geometery is the same in these cars but Porsche makes a wider track by the offset in the front for the RS.
#34
Race Director
Thread Starter
Dang you...you think just like me and are spilling my plans down the short road to have a great cheater DE car.
#36
Race Director
Thread Starter
Thanks Damon we talked yesterday...remember??? Music Industry
Izzone is correct and just what you suggested too...GT3 fronts with GT3RS rears.
Now I either need to wait until there is a sale to help on the pricing for the OZ Forged Super's or what I call...cheese out...and get the cast OZ for $3k less
Izzone is correct and just what you suggested too...GT3 fronts with GT3RS rears.
Now I either need to wait until there is a sale to help on the pricing for the OZ Forged Super's or what I call...cheese out...and get the cast OZ for $3k less
#39
Race Director
Thread Starter
Yeah Izzone is correct and this was verified by Damon at Tire Rack...for the GTS and/or Turbo I need Gt3 front offset and RS rear offset
#41
Rennlist Member
https://rennlist.com/forums/showthre...ferrerid=59610
Mike, I bet they fit. Randy has the same, I know offset might be slightly diffrent in front, but even in MKI 255 easily fit. We have a lot of room in front left. If they don't sell the fronts!
Mike, I bet they fit. Randy has the same, I know offset might be slightly diffrent in front, but even in MKI 255 easily fit. We have a lot of room in front left. If they don't sell the fronts!
#42
Race Director
Thread Starter
https://rennlist.com/forums/showthre...ferrerid=59610
Mike, I bet they fit. Randy has the same, I know offset might be slightly diffrent in front, but even in MKI 255 easily fit. We have a lot of room in front left. If they don't sell the fronts!
Mike, I bet they fit. Randy has the same, I know offset might be slightly diffrent in front, but even in MKI 255 easily fit. We have a lot of room in front left. If they don't sell the fronts!
You should scoop these up for an extra set since you bent some E88's. the Red would look cool on your car for sure!
#44
Race Director
Thread Starter
That is 7mm over stock and 5mm over the pushed out to the edge OZ.
Although I am really confused about offsets....smaller number the more pushed out the wheel is....Forgeline quoted me some really really odd offsets...compared to stock offsets and what Tire Rack shows for th OZ offsets with all make sense.
#45
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
stock offset is 53.....OZ for example is 51....these are listed at 46.
That is 7mm over stock and 5mm over the pushed out to the edge OZ.
Although I am really confused about offsets....smaller number the more pushed out the wheel is....Forgeline quoted me some really really odd offsets...compared to stock offsets and what Tire Rack shows for th OZ offsets with all make sense.
That is 7mm over stock and 5mm over the pushed out to the edge OZ.
Although I am really confused about offsets....smaller number the more pushed out the wheel is....Forgeline quoted me some really really odd offsets...compared to stock offsets and what Tire Rack shows for th OZ offsets with all make sense.
In my opinion the 9 at +46 on the front of a GT3 or GTS will be quite aggressive unless you have 2 or 3 degrees of camber dialed into it.
GA3R, GWC3R, GZ3R,
18 or 19x9 +51 (GT3)
18 or 19x9 +47 (GT3RS)
18 or 19x12 +59 (GT3)
18 or 19x12 +47 (GT3RS)
DE3S, MD3S, SP3S, SO3S, etc…
19x8.5 +51 (GT3)
19x9 +47 (GT3RS)
19x12 +62 (GT3)
19x12 +50 (GT3RS)
__________________
David Schardt
President
Forgeline Motorsports
3522 Kettering Blvd.
Dayton, Ohio 45439
http://www.forgeline.com
David Schardt
President
Forgeline Motorsports
3522 Kettering Blvd.
Dayton, Ohio 45439
http://www.forgeline.com
Facebook Post