Oil change 997 gt3
#32
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
i use ramps, and round catch pan with spout. cardboard under pan catches any errant oil.
#34
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
I have checked the part numbers for the two drain plugs on 997.1 gt3. The one on the tank is M20x1,5mm partnumber 90006501800 https://www.oemvwshop.com/9000650180...-1-5-p2577777/
The crank drain plug is also M20x1,5mm but another socket size? partnumber 94410719701 https://www.fvd.net/no-en/9441071970...0-x-15-mm.html
This means the stahlbus drain plug can be used on both.
The crank drain plug is also M20x1,5mm but another socket size? partnumber 94410719701 https://www.fvd.net/no-en/9441071970...0-x-15-mm.html
This means the stahlbus drain plug can be used on both.
Last edited by norwegen911; 11-14-2022 at 12:43 PM.
The following users liked this post:
balefire (07-06-2024)
#35
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
About to do first oil change. Can anyone confirm that they have installed the same Stalhbus valve on both the tank and sump and there are no issues with clearance, hanging too low, etc.? Thanks.
#36
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
I will do the same
#38
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
I have checked the part numbers for the two drain plugs on 997.1 gt3. The one on the tank is M20x1,5mm partnumber 90006501800 https://www.oemvwshop.com/9000650180...-1-5-p2577777/
The crank drain plug is also M20x1,5mm but another socket size? partnumber 94410719701 https://www.fvd.net/no-en/9441071970...0-x-15-mm.html
This means the stahlbus drain plug can be used on both.
The crank drain plug is also M20x1,5mm but another socket size? partnumber 94410719701 https://www.fvd.net/no-en/9441071970...0-x-15-mm.html
This means the stahlbus drain plug can be used on both.
![](https://cimg1.ibsrv.net/gimg/rennlist.com-vbulletin/2000x274/screenshot_2023_04_12_at_6_18_29_pm_650f2be1f2eece1d1363980850b82ce37acf91c1.png)
#39
#42
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Floor jack on the rear passenger side is all that's needed. Lift, remove drain plugs, lower. Repeat on reassembly.
#44
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Norwegian doesn't have any wood. Ikea took all of it.