RS is hard to downshift
#1
RS is hard to downshift
Very different from s2k I used to drive
when I downshift, rev goes down much more slowly in s2k
for RS, the rev goes down much faster... probably bc of smfw
Any tips for newbie?
when I downshift, rev goes down much more slowly in s2k
for RS, the rev goes down much faster... probably bc of smfw
Any tips for newbie?
The following 4 users liked this post by ngng:
#4
#6
Tough to describe things that you wouldn't normally think much of and do subconsciously, but it sounds to me like you just need to do the downshift and throttle blip/rev match a bit faster. That's all.
Trending Topics
#8
The following 2 users liked this post by Waxer:
9872SpeedYellowCS (05-12-2021),
Booth9999 (07-12-2021)
#11
I find these cars to be some of the easiest to rev match. The fact the revs go up and down so fast helps me. If I tap the throttle I’ll bump the revs 1-2k. If I push the throttle all the way down and release I’ll get 3k+ higher. Usually enough for the lower gear. I cruise between 2-4th gears on the back roads. Personal opinion, but I believe driving between 60-100mph is the most fun while being somewhat safe. Go drive more and you’ll get the hang of it like everyone said
The following users liked this post:
Robocop305 (05-12-2021)
#13
The following 2 users liked this post by RAudi Driver:
Booth9999 (07-12-2021),
pissedpuppy (05-12-2021)