Antique Tracking
#91
Racer
Thread Starter
The sensor issue was the polar opposite where the car sounded normal but there was a lack of low end torque and a CEL was triggered. Car was totally OK to drive other than the limp mode feel.
#93
Racer
Thread Starter
Went to the Hooked on Driving and Speed District Laguna Seca days to wrap the year up. This brings the total of track days to 17 this year. Day one was a bit of a challenge as my front wheel weights fell off and I had to spend some time re-balancing the wheels. The vibration was not fun to drive with. The track was extremely dusty and the best time for that day was 1:35.9 with consistent 1:36 laps throughout the day.
The car ran really well and the 2nd day felt pretty epic. Even though the times were declining due to tire wear, it was some of the best driving experience I had this year. Really nice way to wrap up the year.
Next up is a major detail of the car during the year end break and getting it ready for the next season!
As a side note, I was finally able to get through all my previous videos and will link my session on the Michelin slicks at Laguna. The tires are definitely capable of running consistent 1:34 laps, but all I could do is 1:35s.
The car ran really well and the 2nd day felt pretty epic. Even though the times were declining due to tire wear, it was some of the best driving experience I had this year. Really nice way to wrap up the year.
Next up is a major detail of the car during the year end break and getting it ready for the next season!
As a side note, I was finally able to get through all my previous videos and will link my session on the Michelin slicks at Laguna. The tires are definitely capable of running consistent 1:34 laps, but all I could do is 1:35s.
#94
Racer
Thread Starter
Details, details...
After the track season is done, I spend about 30 hours detailing and cleaning the car. While this is not a track update specifically, many of us clean our cars, so thought I would share. I use a lot of the standard cleaners, but this time I decided to give the Carpro product line a try and do a ceramic coating myself.
First up is a wash with decontamination of Iron and Tar particles, using the "stripping" shampoo to get rid of previous coatings and waxes.
Next up is clay bar and compound stage using Meguire's microfiber pad and compound.
The paint turned out nicely. Next up is the layering of the Cquartz 3.0 ceramic coating, followed by Gliss top coat. This stage took a good 5 hours with an additional 48 hours of "curing".
With the paint sorted, it was time to take on the interior. Since we track with our windows down, a ton of dirt builds up in the carpets and behind the roll-cage. We spend most of our time inside the car, so I enjoy this step of the cleaning process the most.
After that, it is time to address the trim, which also takes a beating on the track.
While at it, I replaced the BMC filter in prep for the next season.
My wife helped me complete the install of the wireless steering wheel. This allows me to operate blinkers, headlights, PASM, TC, horn, etc. from the face of the steering wheel. More of a convenience than anything else.
Almost there...suspension cleaning and inspection.
And finally, my least favorite part, the wheels. I use a set of 18 BBS E08 and 19 BBS E88 wheels. While they are great for the track, the fact that they have painted, polished and bare metal surfaces makes them insanely hard to maintain and clean. It easily takes me 2 hours per wheel to clean.
Last but not least, new track numbers going on (wife seems to be into decals).
Once complete, all that's left is to clean up the mess in the garage.
Overall, fairly pleased with the results, although the coating took a while to apply, and you have to be fairly careful to do a thorough job. It will be interesting to see how it holds up with all the track rubber throughout the year.
That was my Christmas break, in between kids, family and other chores. Next up are a few track upgrades before the next event in February...
1. Transmission is going to Vegas for a refresh by Bill Rader and possible re-gearing
2. Tractive system is out for 2019, being replaced with Penske Pro shocks
3. Cup Power Steering pump is being installed
I think all three upgrades, combined with a refreshed engine should yield some nice results in 2019. Can't wait!
First up is a wash with decontamination of Iron and Tar particles, using the "stripping" shampoo to get rid of previous coatings and waxes.
Next up is clay bar and compound stage using Meguire's microfiber pad and compound.
The paint turned out nicely. Next up is the layering of the Cquartz 3.0 ceramic coating, followed by Gliss top coat. This stage took a good 5 hours with an additional 48 hours of "curing".
With the paint sorted, it was time to take on the interior. Since we track with our windows down, a ton of dirt builds up in the carpets and behind the roll-cage. We spend most of our time inside the car, so I enjoy this step of the cleaning process the most.
After that, it is time to address the trim, which also takes a beating on the track.
While at it, I replaced the BMC filter in prep for the next season.
My wife helped me complete the install of the wireless steering wheel. This allows me to operate blinkers, headlights, PASM, TC, horn, etc. from the face of the steering wheel. More of a convenience than anything else.
Almost there...suspension cleaning and inspection.
And finally, my least favorite part, the wheels. I use a set of 18 BBS E08 and 19 BBS E88 wheels. While they are great for the track, the fact that they have painted, polished and bare metal surfaces makes them insanely hard to maintain and clean. It easily takes me 2 hours per wheel to clean.
Last but not least, new track numbers going on (wife seems to be into decals).
Once complete, all that's left is to clean up the mess in the garage.
Overall, fairly pleased with the results, although the coating took a while to apply, and you have to be fairly careful to do a thorough job. It will be interesting to see how it holds up with all the track rubber throughout the year.
That was my Christmas break, in between kids, family and other chores. Next up are a few track upgrades before the next event in February...
1. Transmission is going to Vegas for a refresh by Bill Rader and possible re-gearing
2. Tractive system is out for 2019, being replaced with Penske Pro shocks
3. Cup Power Steering pump is being installed
I think all three upgrades, combined with a refreshed engine should yield some nice results in 2019. Can't wait!
#95
Hi there
Great job cleaning the car!
Please tell me more about the wireless steering wheel system. I have been considering one for my 996 GT3 for some time now. I have a cup wheel with a spacer to get the wheel close enough.. and now the stalks for wipers and indicators are too far away.
Great job cleaning the car!
Please tell me more about the wireless steering wheel system. I have been considering one for my 996 GT3 for some time now. I have a cup wheel with a spacer to get the wheel close enough.. and now the stalks for wipers and indicators are too far away.
#96
Pro
That looks fantastic. Wow.
Whats made you move from tractive shocks to Penske? I have some very top end custom made Murray Coote shocks in my 997.1 gt3cs that are superb, but liked the idea of the tractive range of operation. Hence asking.
Whats made you move from tractive shocks to Penske? I have some very top end custom made Murray Coote shocks in my 997.1 gt3cs that are superb, but liked the idea of the tractive range of operation. Hence asking.
#97
I'm a narrow body guy. Even though I wish I still had my Green .1 RS Please don't ever stop updating this thread. I love reading your cars evolution. Tom and Tye's build threads also give me hope and inspire me continue working on my car. Awesome stuff. And Happy Holidays! JBO PS How are you going to tune the Penskes? I've said this a hundred times but my pro racer buddy said I'd need a full time engineer to run Penskes.
#98
Rennlist Member
Hi there
Great job cleaning the car!
Please tell me more about the wireless steering wheel system. I have been considering one for my 996 GT3 for some time now. I have a cup wheel with a spacer to get the wheel close enough.. and now the stalks for wipers and indicators are too far away.
Great job cleaning the car!
Please tell me more about the wireless steering wheel system. I have been considering one for my 996 GT3 for some time now. I have a cup wheel with a spacer to get the wheel close enough.. and now the stalks for wipers and indicators are too far away.
#99
Racer
Thread Starter
Hi there
Great job cleaning the car!
Please tell me more about the wireless steering wheel system. I have been considering one for my 996 GT3 for some time now. I have a cup wheel with a spacer to get the wheel close enough.. and now the stalks for wipers and indicators are too far away.
Great job cleaning the car!
Please tell me more about the wireless steering wheel system. I have been considering one for my 996 GT3 for some time now. I have a cup wheel with a spacer to get the wheel close enough.. and now the stalks for wipers and indicators are too far away.
I went from stock suspension to Tractive and never experienced high end mechanical dampers, so really wanted to feel the difference. Also, when I started, I drove to the track and used my front axle lift; Tractive was the perfect solution for that. Now I trailer and have taken the lift out, so logically speaking a pure racing shocks is better fit for purpose. In theory a $12,000 racing shock, should have superior internals and adjustability than a $7,000 all purpose shock, but we will find out.
I will likely write up a review of using Tractive for two years and try to share my good and bad experiences with the setup, but overall I have been thrilled with them and clearly my track times show how effective Tractive really is.
I'm a narrow body guy. Even though I wish I still had my Green .1 RS Please don't ever stop updating this thread. I love reading your cars evolution. Tom and Tye's build threads also give me hope and inspire me continue working on my car. Awesome stuff. And Happy Holidays! JBO PS How are you going to tune the Penskes? I've said this a hundred times but my pro racer buddy said I'd need a full time engineer to run Penskes.
As far as Penske go, I did speak to my Pro driver friend and he said the same thing. It would take him 2-3 full test days and likely 2-3 re-valves before they are perfectly setup. Once setup however, they should be superior to almost anything available. The good news for me is that they are 2-way adjustable only (3 and 4 way would need detailed data for setup), I only frequent 3 tracks, so setup will likely be universal, and I am not a pro driver, so some imperfection in setup is acceptable to me (Tractive had their issues as well). All in all I am pretty excited, but also scared about it all. Let's see how it goes!
#100
Pro
Thanks for that. If it helps, Ihave race shocks in same $ range as you are getting and I really rate ‘spending for quality shocks’, I think it about the best mod on the car. The ride is surprisingly ‘ok’ on the street too. On track, they are simply amazing. I feel like they will take anything I can throw at them on track. Though I wouldn’t multi day road trip the car anymore.
Thanks for sharing. May they find you some elusive time and satisfaction!
Thanks for sharing. May they find you some elusive time and satisfaction!
#101
Racer
Thread Starter
Thanks for that. If it helps, Ihave race shocks in same $ range as you are getting and I really rate ‘spending for quality shocks’, I think it about the best mod on the car. The ride is surprisingly ‘ok’ on the street too. On track, they are simply amazing. I feel like they will take anything I can throw at them on track. Though I wouldn’t multi day road trip the car anymore.
Thanks for sharing. May they find you some elusive time and satisfaction!
Thanks for sharing. May they find you some elusive time and satisfaction!
For me it has been an interesting journey with the car and I can say that the wider front end with 265/275 tires and aero have also been huge performance boosters and have transformed the way the car drives; I really had to re-adjust the driving style after those mods. The only thing I am still not 100% happy with is the braking feel, but I will play with that setup some more this year (i.e. brakes function perfectly fine, but compared to the 991 brakes they do not feel nearly as stable or as powerful; I know different chassis but still wishful comparison).
#102
I built the hardware with a wired QR that controls the same functions. A mutual associate of the OP and mine built and programmed the arduino powered wireless function. You can see more in the link in my sig on how this is built. If you're serious about this PM me and we can discuss further.
While searching I came across this site http://blinkstop.co.uk/shop/index.ph...tegory&path=59
They seem to have DIY kits for sale. No idea if the technology is same as in your version? With that kit I might be able to work it out by myself..
#103
Racer
Thread Starter
Quick update. Transmission is out and on it's way to Bill Rader.
Tractive shocks are also out, cleaned and ready for the new owner.
Unfortunately one of the shocks had a collapsed seal and developed a leak. It is on the way to Tom for a quick rebuild (thanks Tom)!
My Penske are being rebuilt next week as well, so the car should be back together by month end, just in a time for some February track time (weather pending). I must say, seeing the Tractive out of the car makes me sad and a sense of panic is kicking in! At least I know my buddy will enjoy them.
Tractive shocks are also out, cleaned and ready for the new owner.
Unfortunately one of the shocks had a collapsed seal and developed a leak. It is on the way to Tom for a quick rebuild (thanks Tom)!
My Penske are being rebuilt next week as well, so the car should be back together by month end, just in a time for some February track time (weather pending). I must say, seeing the Tractive out of the car makes me sad and a sense of panic is kicking in! At least I know my buddy will enjoy them.
#105
Racer
Thread Starter
These cars do need a lot of investment to make them go fast. Fortunately they provide a very unique experience and feel when being driven well. Getting from my car into a 991 GT3 or RS simply does not provide the same level of tactile excitement, but I may be stubborn. Once the 992 GT3s and new GT4s come out, it may be time to retire this car from track duty...so another good year ahead. Not really sure what the replacement, if any would be?