When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
We have a flash deal: If you buy your replacement switches along with a set of center caps (any color), we will give you the License Plate Led kit for free!
This promotion will be valid for the rest of the month (02/28).
For all Rennlist members during March, when you get your replacement set of switches from our store, you get an original Porsche leather keyringfor free!
All you have to do is write in your order comments the keyring color you choose, among the ones available:
Batch 3 is sold out. It will be shipping to customers next week.
Batch 4 will be ready in 2-3 weeks as we just put a few more into production along with a Ferrari 575 interior.
As always, if you call us, we will reserve a set for you. We get your info but don't charge you until we ship.
The shop number is +1.650.489.4415
If you guys don't know, every plastic piece of a modern Ferrari (348 on up) will eventually go bad. And not just scrape off like the 997 AC buttons.
They actually turn goopy and sticky like tar. Attached are some pieces we just got in.
We should have a two sets next week. One of those is sold. PM us or give us a call at the shop to reserve that second set. The Rev3 cores have been a little slow coming back so we don;t ahve as many in produciton as we would have liked.
We should have a two sets next week. One of those is sold. PM us or give us a call at the shop to reserve that second set. The Rev3 cores have been a little slow coming back so we don;t ahve as many in produciton as we would have liked.
Hi John, we've emailed each other back on Feb 5th and sent you a payment for a spot on the 4th batch the following day. I thought we were good to go?
I got in on the MA Carbonbatch three and I just confirmed that they did receive my cores so they should be available to you guys soon. I'm very happy with my new buttons and like most everyone has said, the removal of the old ones isn't that tough and the installation of the new ones is even easier. Get the pick set though, if you don't already have one because I used every one of those tools. Oh, also make sure you have a set of small torx bits for your screw driver. I think it's a T-8 if I remember correctly.
Haha, oops. That "Before" picture was from my prior 997. I got another one this past Thanksgiving but it doesn't have the Sport Chrono package that shows in the before picture. My new one came with Sport Seats and the Porsche Sport Exhaust.
MA Carbon charges a core fee. Once you get the new toggles and replace your current ones, you send back the old ones for a refund of your core fee, then they redo those and sell them to someone else.
He means he returned his cores so they should be making them for someone else.
MA Carbon charges a core fee. Once you get the new toggles and replace your current ones, you send back the old ones for a refund of your core fee, then they redo those and sell them to someone else.
He means he returned his cores so they should be making them for someone else.
I think I was batch 3 MACarbon and can’t rave highly enough about the product or service experience. My old buttons are apparently in LA having been sent from Australia so another core set should be there shortly. Thanks to this informative thread and MACarbon for sorting out the eyesore.