Damned AC buttons-- a fix???
#436
Meanwhile you can check our tutorial video and instructions:
Best regards,
John
#437
Three Wheelin'
#438
V3
i know this thread is about a year old but I’m wondering is anyone tried v3 of this product ? I bought my 997 with worn switches and would like to fix them.
Or should I get them from sticky no more?
Or should I get them from sticky no more?
#439
#441
Three Wheelin'
Go back a few pages here. This thread talks about these switches.
I'm on the 4th batch waiting list for the MA Carbon set. Contact John to get on that list since they should be ready soon.
I'm on the 4th batch waiting list for the MA Carbon set. Contact John to get on that list since they should be ready soon.
Last edited by DesmoSD; 02-14-2018 at 10:41 AM.
#443
You definitely need to read through this thread. There was some really sketchy stuff pulled by one of the manufacturers. Just saw a pic in the classifieds of the latest version from that manufacturer, and their stuff still looks 3D printed (the TEMP label looks crooked, too). MACarbon uses the factory switches, and in photo look much better/factory than the other guy's.
#444
Three Wheelin'
@mellowmike - what they said ^. Welcome to the club.
ps - if the soft touch paint on your center console is ragged out like the switches, its a pretty easy DIY to repaint if you have a black interior. You can also buy a new consoles for around $700.
ps - if the soft touch paint on your center console is ragged out like the switches, its a pretty easy DIY to repaint if you have a black interior. You can also buy a new consoles for around $700.
#445
Rennlist Member
You definitely need to read through this thread. There was some really sketchy stuff pulled by one of the manufacturers. Just saw a pic in the classifieds of the latest version from that manufacturer, and their stuff still looks 3D printed (the TEMP label looks crooked, too). MACarbon uses the factory switches, and in photo look much better/factory than the other guy's.
#446
Do you have an STL file for 3D printing these switches?
#448
Hello. For the last time, our switches are NOT 3D printed. V1´s were, but V2´s and V3´s are not. Please do not make that statement, because it is simply not true.
Regards,
John
#449
#450
Rennlist Member
I stand behind the original post.