DSC Sport - Tuning Software Discussion Thread
#46
I noticed this same blip in my tables before making any modifications. Probably a default g-table setup mistake from the factory DSC.
#48
Thread Starter
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Joined: Dec 2014
Posts: 532
Likes: 56
From: Jessup, MD
Take a closer look at your g-tables, there is a minor blip at .6F/.2L for all three tables. Basically the default tables are setup to be symmetrical left to right. But for some reason the .6F/.2L settings are 80%LF / 70%RF. This is the only entry in all three tables where Left and Right are asymmetrical. Change it to 80%LF / 80%RF to remove the g-table anomaly.
I noticed this same blip in my tables before making any modifications. Probably a default g-table setup mistake from the factory DSC.
I noticed this same blip in my tables before making any modifications. Probably a default g-table setup mistake from the factory DSC.
We're going to make our base maps available on the new site, so we'll be sure to make the fix before uploading those files.
#49
I have the 997.1 version with three modes loosely named normal, sport, and track in the software. My PASM light on the console is either solid, blinking twice, or blinking three times depending upon the mode. Exchanging emails with Tom at TPC Racing he mentioned something about newer models of the DSC box only have two modes. Is this correct? If so how do the g-tables and shock calibration settings match up with the version I have? Any improvements to the settings? What about the console lights, do they operate differently? If so do you offer an exchange/upgrade program?
#50
Originally Posted by semicycler
I have the 997.1 version with three modes loosely named normal, sport, and track in the software. My PASM light on the console is either solid, blinking twice, or blinking three times depending upon the mode. Exchanging emails with Tom at TPC Racing he mentioned something about newer models of the DSC box only have two modes. Is this correct? If so how do the g-tables and shock calibration settings match up with the version I have? Any improvements to the settings? What about the console lights, do they operate differently? If so do you offer an exchange/upgrade program?
#56
Any others out there who've set up a comfort setting? I might try dialing out the full soft to something like 25-30% but I'll have to go back and look at the stock map on mode 1.
eta: I'm on B16s with stock tire sizes for an S, BStone S0-4s.
#58
WEll it seems there are many different softwares flying around! I just tried the latest one out from the NZ agent and I went back to my stock one above. The latest was very bumpy and poorly controlled at low speed - the girlfriend's, ah, little not so little friends were getting badly jounced about and she straightaway said put the old software back in!!!
#59
WEll it seems there are many different softwares flying around! I just tried the latest one out from the NZ agent and I went back to my stock one above. The latest was very bumpy and poorly controlled at low speed - the girlfriend's, ah, little not so little friends were getting badly jounced about and she straightaway said put the old software back in!!!