Torque wrench for torque multiplier
#1
Drifting
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
I'm pretty sure of the answer, but wanted to do a quick sanity check.
In addition to simplifying the R&R process for the CL wheels, I didn't really want to buy a new torque wrench. I've got a 1/2" Precision Instruments torque wrench that'll do 40-250lb. Correct me if I'm wrong, but this should work just fine with the Armstrong 64-832 torque multiplier (1200 ft lbs, 1/2" input, 3/4" output)?
In addition to simplifying the R&R process for the CL wheels, I didn't really want to buy a new torque wrench. I've got a 1/2" Precision Instruments torque wrench that'll do 40-250lb. Correct me if I'm wrong, but this should work just fine with the Armstrong 64-832 torque multiplier (1200 ft lbs, 1/2" input, 3/4" output)?
#3
Drifting
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Another question, the multiplier is accurate to +/- 5%, is this acceptable? Or do I need to buy a 600lb wrench that can check the final torque settings.
#5
Rennlist Member
The following users liked this post:
Fatsix (01-06-2023)
Trending Topics
#8
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Has any one tried the Performance Tool by Wilmar? The same tool is sold by FCP Euro for about $225 but is on sale on Amazon now for $150 ish
at 1/3 of the price of the Precision Instruments, it looks like it might be worth a look and should do the job??
https://a.co/d/gDtAEIO
FCP Euro
at 1/3 of the price of the Precision Instruments, it looks like it might be worth a look and should do the job??
https://a.co/d/gDtAEIO
FCP Euro
Last edited by G80; 02-20-2024 at 08:35 PM.
The following users liked this post:
brnjms (02-23-2024)