Battery question
#17
Three Wheelin'
#19
I recently got a 3.5 year old Targa 4S with very low miles and while the battery worked fine for the first few days, I then needed 3 jump starts to get me home then to the local interstate store and put in an H7. It was definitely heavier than the factory battery, but since I do shorter trips I figured I wanted the highest cranking battery I could get.
The guy that jumped the car for me said he believes this vintage of car needs a lot more cranking power to turn over than other cars. I wonder if there is any truth to that? ALso it was quite a bit harder to jump this car then any other I've had. A jump from a normal vehichle didn't work,- as a matter of fact he used the portable and his truck hooked to together to make it turn over.
And I did drive the car for about 45 minutes after the first jump. I would have thought that would be enough to charge it. I didn't end up testing the old battery to see if it could have been recharged. (which I wouldn't have anyway after getting stuck several times)
The guy that jumped the car for me said he believes this vintage of car needs a lot more cranking power to turn over than other cars. I wonder if there is any truth to that? ALso it was quite a bit harder to jump this car then any other I've had. A jump from a normal vehichle didn't work,- as a matter of fact he used the portable and his truck hooked to together to make it turn over.
And I did drive the car for about 45 minutes after the first jump. I would have thought that would be enough to charge it. I didn't end up testing the old battery to see if it could have been recharged. (which I wouldn't have anyway after getting stuck several times)
#20
I do believe older/vintage cars need a high cca. But since the battery is so far away from the engine/starter there is some energy loss and it can be more difficult to jump, esp if your battery is on its last leg (sounds like it was, it should have been charged after 45 min). So on our cars you need a higher cca than other front engine cars, but not a lot.
#21
Drifting
The H7 Walmart Energy Maxx battery dropped right in - perfect fit.
BUT - after discovering that the plug for the un-needed vent hole is built into the plastic covers (grey) that cover the battery posts of the new battery, I looked and lo-and-behold, some jackass had removed it from the covers of my new battery already. Grrr.
Now I have to go to walmart with the cover and get a plug (since mine had the part missing).
BUT - after discovering that the plug for the un-needed vent hole is built into the plastic covers (grey) that cover the battery posts of the new battery, I looked and lo-and-behold, some jackass had removed it from the covers of my new battery already. Grrr.
Now I have to go to walmart with the cover and get a plug (since mine had the part missing).
#23
Every time I come to this site - I think that everyone and the information posted is great!
My battery is not holding a charge so I'm going to start looking for an Interstate Mega Tron Plus H7 battery.
Thanks!!
My battery is not holding a charge so I'm going to start looking for an Interstate Mega Tron Plus H7 battery.
Thanks!!
#24
Drifting
I also notice the Walmart electronic lookup book indicates an H8.
The H7 is dimensionally the same size as the OEM Moll I took out. The H8 would be larger. I wonder why they speck an H8 in the book? Though from the images posted, the clamp can apparently be installed further over for the H8 longer battery. I'll have to check on that.. didn't pay attention when I put in the new battery, to see if there was another option.
#25
Rennlist Member
I also notice the Walmart electronic lookup book indicates an H8.
The H7 is dimensionally the same size as the OEM Moll I took out. The H8 would be larger. I wonder why they speck an H8 in the book? Though from the images posted, the clamp can apparently be installed further over for the H8 longer battery. I'll have to check on that.. didn't pay attention when I put in the new battery, to see if there was another option.
The H7 is dimensionally the same size as the OEM Moll I took out. The H8 would be larger. I wonder why they speck an H8 in the book? Though from the images posted, the clamp can apparently be installed further over for the H8 longer battery. I'll have to check on that.. didn't pay attention when I put in the new battery, to see if there was another option.
#26
Drifting
#27
Got an Interstate Mega Tron Plus H7 battery today.
Instead of standing in my trunk with my bad back, I had my really good indie Porsche install it.
Nice that the car now starts
Instead of standing in my trunk with my bad back, I had my really good indie Porsche install it.
Nice that the car now starts
#28
The dealer tried an 49/H8 and while it fit the tray, the clamps ran out of thread trying to hold it down. The original battery was pretty close to the 94R/H7 size. Is this what everyone else is using? I have it narrowed down to the Interstate AGM and the Exide Edge. Suggestions?
#29
Rennlist Member
H7 size is the way to go IMHO as it is an exact replacement fit. H8 works too but you will need to reposition the hold down clamp to the outer hole and supply a nut (on my 997.2 there was no threaded nut on the H8 clamp hole).
#30
Drifting
I went with an H7 replacement which matches the OEM Moll I took out. The H8 would fit (and is what the walmart electronic catalog speced for the car oddly) but the hole for the clamp may well not be threaded, so you'd have to address that before you go with an H8 size.