Spoiler failure, dealer couldn't find wing control unit.
#1
Spoiler failure, dealer couldn't find wing control unit.
I took my car to the dealer service to get my spoiler failure code fixed (after I installed the 9ff wing). They couldn't fix the code, because they were not able to find the spoiler control unit. So I was wondering if anyone knows if I did something wrong to the spoiler wiring?
Thanks,
Thanks,
#2
Race Car
Join Date: Oct 2006
Location: Next to the blue house
Posts: 4,198
Likes: 0
Received 1 Like
on
1 Post
Is this wing fixed or does it raise? How difficult was the wiring? I deleted my rear wiper and my car did not throw a code....the wiper stalk just does not work. It does not even indiacte an open circut. What code is showing?? Pehaps contacting where you purchased the spoiler would help??
#3
It is a fixed wing like a GT3 spoiler. The car is showing a "spoiler failure" code whenever I go above 75mph. Today I took the car to the dealer again to have them deactivate the spoiler from the ECU. They still couldn't locate the spoiler control unit.
Trending Topics
#8
Addict
Lifetime Rennlist
Member
Lifetime Rennlist
Member
From the Aerokit Installation Instructions TSB 1/05 6658:
Connect PIWIS tester and switch on ignition.
Select vehicle and Rear control unit.
Select Coding, then Spoiler and code fixed spoiler.
Pretty simple if they read the directions
Connect PIWIS tester and switch on ignition.
Select vehicle and Rear control unit.
Select Coding, then Spoiler and code fixed spoiler.
Pretty simple if they read the directions