Change Canadian DRLs to fog lights? 997.1
07-29-2019 | 07:36 PM
#16
Race Car
Joined: Dec 2006
Posts: 3,508
Likes: 166
From: Toronto
I am curious why you need a diode hack for activating the fog lights. I have a US spec car and my DRL's were never activated for some reason. So when I want DRL's i just click the headlight switch over 2 spots and pull the switch out one notch = fog lights activated
07-30-2019 | 01:25 AM
#17
Advanced
Joined: Feb 2017
Posts: 78
Likes: 0
What is this diode hack? My 911 is a Canadian car and I had SpeedStar code the DRL out and I spliced a couple of wires in the light switch so that the fogs will always come on in “home” mode. Easy peasy. I don’t remember which wires were spliced...
07-30-2019 | 12:09 PM
#18
Pro
Joined: Jan 2019
Posts: 707
Likes: 299
From: Colorado
Saw this post on another forum. I've considered doing it myself, but will probably stick with the low-beams as my DRL's as my car is low and hard enough to see as it is.
$2 DRL Solution
$2 DRL Solution
08-02-2019 | 01:55 AM
#19
Nordschleife Master
Joined: Jun 2013
Posts: 5,408
Likes: 604
From: richmond hill
this is pretty much the diode hack, the fact that the fogs come on when the lights are in home mode.
08-02-2019 | 02:21 AM
#20
Thread Starter
Instructor
Joined: May 2019
Posts: 157
Likes: 56
Speedstar does the coding for this? Is it the guys located on Bullock Drive in Markham?
04-03-2022 | 09:14 PM
#21
Instructor
Joined: Jun 2017
Posts: 132
Likes: 28
From: Southern Ontario
This is EXACTLY what I want to do. I have a 987.1 and PCM 2.1 (so I have no access to the DRL) - I'll have to pick up a Durometric Pro and give it a go. Are there any links for the 'diode' solution?
Thanks!
Thanks!
04-03-2022 | 09:30 PM
#22
RL Community Team
Rennlist Member
Rennlist Member
Joined: Oct 2007
Posts: 26,442
Likes: 6,849
From: Clemson, SC
