997.2 Cross Over Pipe/Center Muffler Delete
#47
Three Wheelin'
Thread Starter
Okay that guy made it look so simple without taking off the bumper skirt. I didn’t have an offset 13mm wrench so it was next to impossible to do without taking off the bumper skirt, which was a whole lot easier than I thought it would be. Took about 1.5 hours to do. I will post before and after videos later.
#48
Three Wheelin'
Thread Starter
997.2 Stock exhaust at 5000, 6000 & 7000 RPM. Warm engine 9 feet away.
997.2 Billy Boats crossover pipe installed at 5000, 6000 & 7000 RPM. Warm engine 9 feet away.
997.2 Billy Boats crossover pipe installed at 5000, 6000 & 7000 RPM. Warm engine 9 feet away.
The following users liked this post:
Betofeijo (09-27-2019)
The following users liked this post:
Presto (06-22-2020)
#50
Pro
Bought my Sharkwerks cross-over pipe about a year ago. Finally had it installed last week. Sounds fantastic and I'm a satisfied man. Was a tad louder inside the cabin than I was expecting over stock PSE, but all good.
#51
Rennlist Member
Did You have the PSE and took that away for the Sharkw? I have a non PSE and looking for sound....
#52
997.2 Stock exhaust at 5000, 6000 & 7000 RPM. Warm engine 9 feet away.
https://www.youtube.com/watch?v=IyYak3IY2hw
997.2 Billy Boats crossover pipe installed at 5000, 6000 & 7000 RPM. Warm engine 9 feet away.
https://www.youtube.com/watch?v=xzCKUqt5CTg
https://www.youtube.com/watch?v=IyYak3IY2hw
997.2 Billy Boats crossover pipe installed at 5000, 6000 & 7000 RPM. Warm engine 9 feet away.
https://www.youtube.com/watch?v=xzCKUqt5CTg
#53
Instructor
I should be receiving my Top Gear valvetronic exhaust and center muffler delete tomorrow (3 day delivery). I am from Southern Ontario so I won't be installing until the car comes out of storage but will report back when it's in 😊.
https://www.topgear.co.uk/by-manufac...=manufacturers[117]
https://www.topgear.co.uk/by-manufac...=manufacturers[117]
https://www.topgear.co.uk/by-manufac...=manufacturers[117]
https://www.topgear.co.uk/by-manufac...=manufacturers[117]
#54
Advanced
Can anyone comment on comparisons between Fabspeed, Sharkwerks, and Billy Boat center pipe delete? I am aware some cross over whereas some return exhaust to their respective side/bank. The Billy Boat is substantially cheaper than the other two options so I am leaning that way. Are they all 2in diameter pipe? I don't see the returns on spending nearly double the price of the BB midpipe.
https://rennlist.com/forums/997-foru...s-997-2-a.html
Topgear similar to FabSpeed x pipe design.
https://rennlist.com/forums/997-foru...r-997-2-a.html
Last edited by rmstar; 03-06-2019 at 04:42 AM.
#55
Nordschleife Master
You don't mention what model year car you have but since you're mentioning Sharkwerks I'm assuming you have a .2 car. The Sharkwerks x-pipes only replaces the center muffler on a 997.2 car. Since you have a non PSE I would look into a Tubi system since it replaces both the side mufflers and the center mufflers in one package http://www.championmotorsport.com/Tu...aust_a/154.htm.
Had that on my -09 C4S and loved it. Pretty sure this would cost you less than OEM PSE mufflers + any of the x-pipes to replace the center muffler. Don't waste money on just replacing the side mufflers or the center muffler alone. Both have to go on a non PSE car to get where you want to be.
#56
Pro