FS: CCW C10 forged 18x9, 18x12 wheels...
#1
Rennlist Member
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
I am selling my extra set of mint conditions CCW C10 wheels. These wheels are forged monoblock made in the USA from T6061 aluminum forgings. They are 18x9 ET53 and 18x12 ET41. These are very light and very strong. 18x9 weighs 21.2 lbs. and the 18x12 is 24.1 lbs. These wheels will allow you to run a wide range of tires on both the 996TT/996GT2 and 997TT/997GT2. I ran a 7mm spacer on the fronts with 245/40/18 tires to maximize front track width but could run it without the spacer on my JRZs with a 265 without rubbing as it put the tire right up against the inner spring perch. On a 996TT with PSS10s or H&Rs, you will need a 7mm spacer on the front to clear the larger diameter front springs that come stock on those coil overs.
For AWD 996TT/GT2 set ups you can run a 235/40/18 or 245/40/18 and 315/30/18. For a 996GT2/997TT/997GT2 you can also run a 245/40/18 and 305/35/18 or 315/35/18 sizes. 335/30/18 rears will also work in some applications.
These wheels WILL CLEAR PORSCHE FACTORY PCCB 380MM BRAKES!!
I bought these wheels brand new from CCW in the fall of 2013 and put about 1000 miles on them. They were purchased with a raw anodized finish. I just had them professionally finished in a Competition Metallic Grey satin powder coat. They are immaculate without a single blemish. Included with the wheels are billet aluminum center caps with a custom Porsche logo. I have 4 other sets of wheels and need to make some room. Purchased from CCW, this set finished in powder coat costs $3300 plus $180 shipping ($700 each front, $775 each rear, $350 powder coat).
I have priced these aggressively at $2000 plus $180 shipping CONUS in factory boxes insured via Fedex. Buyer is responsible for any paypal fees. Please do not waste my time with any low ball offers. Thank you...
[url=https://flic.kr/p/nUY6LP]![](http://www.6speedonline.com/forums/attachment.php?attachmentid=384814&dateline=1402355319)
[url=https://flic.kr/p/nCLHt8]![](http://www.6speedonline.com/forums/attachment.php?attachmentid=384815&dateline=1402355319)
[url=https://flic.kr/p/nV94jf]![](http://www.6speedonline.com/forums/attachment.php?attachmentid=384816&dateline=1402355319)
[url=https://flic.kr/p/nVceUE]![](http://www.6speedonline.com/forums/attachment.php?attachmentid=384817&dateline=1402355319)
[url=https://flic.kr/p/nX3C4z]![](http://www.6speedonline.com/forums/attachment.php?attachmentid=384818&dateline=1402355319)
[url=https://flic.kr/p/nCMGgz]![](http://www.6speedonline.com/forums/attachment.php?attachmentid=384819&dateline=1402355319)
[url=https://flic.kr/p/nX3BRk]
For AWD 996TT/GT2 set ups you can run a 235/40/18 or 245/40/18 and 315/30/18. For a 996GT2/997TT/997GT2 you can also run a 245/40/18 and 305/35/18 or 315/35/18 sizes. 335/30/18 rears will also work in some applications.
These wheels WILL CLEAR PORSCHE FACTORY PCCB 380MM BRAKES!!
I bought these wheels brand new from CCW in the fall of 2013 and put about 1000 miles on them. They were purchased with a raw anodized finish. I just had them professionally finished in a Competition Metallic Grey satin powder coat. They are immaculate without a single blemish. Included with the wheels are billet aluminum center caps with a custom Porsche logo. I have 4 other sets of wheels and need to make some room. Purchased from CCW, this set finished in powder coat costs $3300 plus $180 shipping ($700 each front, $775 each rear, $350 powder coat).
I have priced these aggressively at $2000 plus $180 shipping CONUS in factory boxes insured via Fedex. Buyer is responsible for any paypal fees. Please do not waste my time with any low ball offers. Thank you...
[url=https://flic.kr/p/nUY6LP]
[url=https://flic.kr/p/nCLHt8]
[url=https://flic.kr/p/nV94jf]
[url=https://flic.kr/p/nVceUE]
[url=https://flic.kr/p/nX3C4z]
[url=https://flic.kr/p/nCMGgz]
[url=https://flic.kr/p/nX3BRk]
The following users liked this post:
dak996 (01-19-2023)
#4
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Great looking wheel and very tempting as I am not a huge fan of the wheels that came on my car...
#5
Rennlist Member
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Wheels are SOLD. I will have another identical set for sale in the next two weeks. 18x9 ET47, 18x12 ET39 CCW C10s finished in anodized shot peened titanium
#6
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
you are a maniac my friend
![Wink](https://rennlist.com/forums/images/smilies/wink.gif)
#7
Rennlist Member
Thread Starter
Trending Topics
#9
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
i'd want a shot at them john. was about to send offer that hoping wouldn't reflect poorly on me
and saw them sold. no surprise.
i'm running same sizes 40 offset frt/rear. should be same fit.![Smilie](https://rennlist.com/forums/images/smilies/smile.gif)
wtf is "shot peened" titanium. is that like when a revenuer comes up the holler? lol
![Smilie](https://rennlist.com/forums/images/smilies/smile.gif)
i'm running same sizes 40 offset frt/rear. should be same fit.
![Smilie](https://rennlist.com/forums/images/smilies/smile.gif)
wtf is "shot peened" titanium. is that like when a revenuer comes up the holler? lol
#10
Rennlist Member
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
i'd want a shot at them john. was about to send offer that hoping wouldn't reflect poorly on me
and saw them sold. no surprise.
i'm running same sizes 40 offset frt/rear. should be same fit.![Smilie](https://rennlist.com/forums/images/smilies/smile.gif)
wtf is "shot peened" titanium. is that like when a revenuer comes up the holler? lol
![Smilie](https://rennlist.com/forums/images/smilies/smile.gif)
i'm running same sizes 40 offset frt/rear. should be same fit.
![Smilie](https://rennlist.com/forums/images/smilies/smile.gif)
wtf is "shot peened" titanium. is that like when a revenuer comes up the holler? lol
#11
Rennlist Member
#13
Rennlist Member
Thread Starter
#14
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Silly question, but will your upcoming set fit a narrow body 996 C2?