Cup lip installation... 2 sided tape or Goop! ?
#1
Rennlist Member
Thread Starter
Cup lip installation... 2 sided tape or Goop! ?
I removed my regular lip in favor of a Cup lip.
Removal was rather difficult due to the presence of 2 sided automotive trim tape holding very nicely. Lip also came off cleanly with a little effort.
So to reinstall now...
Should I get some automotive double sided tape or could I simply use a small bead of Automotive Goop! ?
Removal was rather difficult due to the presence of 2 sided automotive trim tape holding very nicely. Lip also came off cleanly with a little effort.
So to reinstall now...
Should I get some automotive double sided tape or could I simply use a small bead of Automotive Goop! ?
#6
Admin
Lifetime Rennlist
Member
Lifetime Rennlist
Member
Mike duct tape would cover the gap
But really no gap with any thin d tape. : )
only issue is the last two plastic rivets that are tough to fit as the cup lip is thicker in the edges.
BTW I also run it with screws. Now if it goes it will be something spectacular.. you know running over your own front bumper .. : )
But really no gap with any thin d tape. : )
only issue is the last two plastic rivets that are tough to fit as the cup lip is thicker in the edges.
BTW I also run it with screws. Now if it goes it will be something spectacular.. you know running over your own front bumper .. : )
Trending Topics
#13
Addict
Rennlist Member
Rennlist Member
OEM push pins and silly cone
#14
Drifting
Definitly no screws here... I've ripped mine off twice the last two times on the track, so I'd rather it breaks free than ripping up my bumper. Of course it wouldn't be an issue had I kept the car "ON" the track