Notices
996 Forum 1999-2005
Sponsored by:

Slow crank on hot start - cable replacement?

Thread Tools
 
Search this Thread
 
Old 08-18-2016, 08:23 PM
  #1  
spud72
Instructor
Thread Starter
 
spud72's Avatar
 
Join Date: May 2011
Posts: 176
Received 3 Likes on 2 Posts
Default Slow crank on hot start - cable replacement?

So I never noticed this before, but I stalled the car yesterday and darn near wouldn't restart. Just a slow crank almost like the battery was dead. Waited a couple secs, still did a slightly faster crank (still slow) but was enough to catch.

In my experience that's likely due to a crappy connection or even a cable having V-drop. Being it's a 1999 and I presume original cables, and they're going to be pretty long, I'm thinking of getting some cables built up and replace battery-starter-alternator cables.

Has anyone done them before? Is this a common issue? I did a search for hot-start and didn't really find anything readily visible.

Are the cables a pain in the butt to replace in these things?
Old 08-18-2016, 10:20 PM
  #2  
ltusler
Rennlist Member
 
ltusler's Avatar
 
Join Date: Jul 2005
Posts: 1,287
Received 122 Likes on 57 Posts
Default

It can be the Y cable or the starter. I had the problem and it was the starter.
Old 08-18-2016, 10:42 PM
  #3  
Woodman71
Rennlist Member
 
Woodman71's Avatar
 
Join Date: Apr 2016
Location: SF Bay Area
Posts: 1,573
Received 297 Likes on 153 Posts
Default

Originally Posted by ltusler
It can be the Y cable or the starter. I had the problem and it was the starter.
Me too. Starter and harness replaced.
Old 08-18-2016, 10:50 PM
  #4  
Tonyr313
Instructor
 
Tonyr313's Avatar
 
Join Date: Aug 2015
Posts: 170
Likes: 0
Received 1 Like on 1 Post
Default

Volts on the volt meter when cold and warm engine? It should be 13.8 and above.

Check y cable and alternator also.
Old 08-18-2016, 10:51 PM
  #5  
Tonyr313
Instructor
 
Tonyr313's Avatar
 
Join Date: Aug 2015
Posts: 170
Likes: 0
Received 1 Like on 1 Post
Default

This should save time

https://rennlist.com/forums/996-foru...implified.html
Old 08-19-2016, 03:03 AM
  #6  
Triple Black
Rennlist Member
 
Triple Black's Avatar
 
Join Date: Apr 2013
Location: Vancouver, BC
Posts: 1,088
Received 74 Likes on 45 Posts
Default

Starting motor wiring harness - a common issue.
Old 08-19-2016, 04:38 AM
  #7  
dan_189
Race Car
 
dan_189's Avatar
 
Join Date: Nov 2014
Location: Melbourne, Australia
Posts: 3,804
Received 141 Likes on 124 Posts
Default

Just had mine done failed at 70k (kms).

The upgraded cable has some protection at the end where it attaches to the starter
Old 08-19-2016, 10:27 AM
  #8  
spud72
Instructor
Thread Starter
 
spud72's Avatar
 
Join Date: May 2011
Posts: 176
Received 3 Likes on 2 Posts
Default

Thanks for the replies guys



Quick Reply: Slow crank on hot start - cable replacement?



All times are GMT -3. The time now is 04:01 AM.