996 aero kit picture thread.
#406
I guess the only thing I'm seeing is that the painted portion (the vertical slat seen from front view) is much more obvious, but otherwise, I can't tell - obviously, if I'm missing something, fill me in
Last edited by sdematt; 09-26-2021 at 11:22 PM.
#412
I have both of the bumpers at my house. The mk1 is different, from the front they r almost identical. U can cut out the center rad block off if u add a rad. Also the fender and light interface is different.
The mk2 bumper has a support structure that snaps into the back of the bumper.
The sides are different and the cup splitter for the mk2 does not fit perfect but can be used. I had to drill new holes and fex it a little but it looks good. The splitter is now N/A for porsche but Demon Speed will have a repro soon.
The mk2 bumper has a support structure that snaps into the back of the bumper.
The sides are different and the cup splitter for the mk2 does not fit perfect but can be used. I had to drill new holes and fex it a little but it looks good. The splitter is now N/A for porsche but Demon Speed will have a repro soon.
#414
The following 3 users liked this post by De Jeeper:
The following users liked this post:
RobertM525 (10-10-2021)
The following 5 users liked this post by SleepyCyclist:
C2-996 (10-23-2021),
EVOMMM (10-22-2021),
FLTWRLD996 (10-23-2021),
RobertM525 (10-22-2021),
TheUnscented (11-10-2021)
The following 2 users liked this post by RobertM525:
C2-996 (10-23-2021),
SleepyCyclist (10-23-2021)
The following users liked this post:
C2-996 (10-23-2021)
The following users liked this post:
C2-996 (10-25-2021)